10-25-2022 10:08 PM
Hi All
I was going through Cisco SD-Access and I wonder weather we must acquire Intermediate node or our core switch i.e catalyst 9500 can act as Intermediate node. Thanks for your answer.
Solved! Go to Solution.
10-25-2022 11:20 PM
Hi henockk,
as a distribution switch is optional so is a Intermediate Node. As the design guide describes it is only there to bring IP reachability in the underlay between (mainly) Border and Edge Nodes: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html#IntermediateNode
You can also have a look at "Very Small Site" or "Small Site" Design in the linked Guide. BRKCRS-2502 gives a nice overview too.
10-25-2022 11:20 PM
Hi henockk,
as a distribution switch is optional so is a Intermediate Node. As the design guide describes it is only there to bring IP reachability in the underlay between (mainly) Border and Edge Nodes: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html#IntermediateNode
You can also have a look at "Very Small Site" or "Small Site" Design in the linked Guide. BRKCRS-2502 gives a nice overview too.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide