Switch configs to point to DNA-C

[Steve Bellan]

Team, DNA-C cluster is installed and successfully discovered the subnets. Devices are communicating via SNMP. We are using for Assurance only to begin with. So the question is....to get the most from Assurance what else on the switch do we need to point to the DNA-C? SYSLOG? NetFlow?

ISE will be integrated soon

[Preston Chilcote]

3 suggestions:

1) Take advantage of Cisco Customer Success Ask-the-expert webinars.  They are free and cover all sorts of topics that might be of interest to getting the most out of DNA-C

https://learningnetwork.cisco.com/community/learning_center/cisco-dna-ask-the-experts

2) Bookmark this page, "DNA Getting Started", and review any Assurance trainings that sound helpful:

https://www.cisco.com/c/m/en_us/products/cloud-systems-management/dna-center/getting-started.html

3) Enable application visibility following the instructions here:

https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center-assurance/1-3-1-0/b_cisco_dna_assurance_1_3_1_0_ug/b_cisco_dna_assurance_1_3_1_0_chapter_01001.html

The telemetry profiles built into DNA-C will do the necessary syslog/netflow/application monitoring configs for you!