02-12-2018 08:45 AM - edited 03-08-2019 05:26 PM
Hello Everyone,
I am trying to test DNA center 1.0 version on my lab where i have 3 3850 switches.
switch OS details -
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 16 WS-C3850-12XS 16.3.1 CAT3K_CAA-UNIVERSALK9 BUNDLE
After successful provisioning to DNA center when we will on board the vlan interface on switch i am getting below errors.
Errors on DNA center :
Unable to push CLI 'mac-address 00:00:0c:9f:f4:5c' to device 192.168.120.2 using protocol ssh2
Logs on switches :
*%SIM-3-VLAN_ENTRY_FAIL:Switch 1 R0/0: wcm: Failed to create VLAN interface
Solved! Go to Solution.
02-13-2018 10:13 AM
Hi Nitesh
Few points:
DNA 1.0 is old version and not released / supported version. Please move to DNAC 1.1 Version either November / December release or there might be newer DNAC 1.1.2 version available in next day or two.
In addition, Switch with 16.3.1 is not supported for DNAC. You need to upgrade to 16.6.2S version or wait for 16.6.3 which will be available in next 2 weeks.
Once you try with newer version and still observe the problem than let us know.
Thanks
02-13-2018 10:13 AM
Hi Nitesh
Few points:
DNA 1.0 is old version and not released / supported version. Please move to DNAC 1.1 Version either November / December release or there might be newer DNAC 1.1.2 version available in next day or two.
In addition, Switch with 16.3.1 is not supported for DNAC. You need to upgrade to 16.6.2S version or wait for 16.6.3 which will be available in next 2 weeks.
Once you try with newer version and still observe the problem than let us know.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide