cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1280
Views
0
Helpful
2
Replies
Highlighted
Beginner

ASA 5515x SLA Monitoring Issue

We set up the SLA monitoring for the redundant ISP links and it was working.

However, the SLA monitoring was deleted by someone and then, when I tried to configure by adding the SLA monitoring for the primary interface in the Configuration > Device Setup > Static Routes in the ASDM, we lost the connection on the primary interface.

I reboot the ASA, but the connection still didn't come back.

Should I physically disconnect the cable and connect in order to work?

Please advise.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Hi,

I think this post may be more appropriate for the following forum:

    • https://supportforums.cisco.com/community/5966/firewalling

Thanks,

Kevin W.

View solution in original post

2 REPLIES 2
Highlighted
Cisco Employee

Hi,

I think this post may be more appropriate for the following forum:

    • https://supportforums.cisco.com/community/5966/firewalling

Thanks,

Kevin W.

View solution in original post

Highlighted

Thank you, kevwilso.

I entered the post in the firewalling.

This widget could not be displayed.