cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
359
Views
0
Helpful
4
Replies
Highlighted
Beginner

Create periodic backup of configuration with Embedded Event Manager 4.0

Dear,

 

I would like to know if it is possible to create a weekly backup of configuration with Cisco Router.

 

I tried with this configuration but the result is "abort":

 

event manager applet "name_of_event"
event timer watchdog time 604800 (about 7 days)
action 1.0 cli command "enable"
action 2.0 cli command "copy running-config ftp:"
action 3.0 cli command "server_ip_address"
action 4.0 cli command "folder/name_of_bck_configuration_file"
action 5.0 cli command "exit"

 

Result of command "show event manager statistics policy":


No. Class Triggered Suppressed Run Time Run Time Name
-------------------------------------------------------------------------------
1 applet 1 0 20.042 20.042 "name_of_event"
event {} timer watchdog (Time Remaining: 514224.208)

 

Result of command "show event manager history events detailed":

No. Job Id Proc Status Time of Event Event Type Name
1 1 Actv abort Tue Jul28 16:39:16 2020 timer watchdog applet: "name_of_event"
timer_time 3804939556.681 timer_remain 604800.000

 

Result of command "show event manager version":
Embedded Event Manager Version 4.00


How can i solve it?

 

Regards

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

I would suggest you search the specific Router type and post your questions there. The EEM doesn't appear to have a separate community.

View solution in original post

4 REPLIES 4
Highlighted
Cisco Employee

Hello,

Are you attempting this through the Cisco CLI Analyzer application? https://cway.cisco.com/cli/

You may want to clarify your ask as I'm not sure this is the correct community to assist you.

Thank you

Highlighted

Hi,

 

no, I'm not trying with Cisco CLI Analyzer. I am trying with normal Cisco Command Line.

 

I don't know because has been set this section.

 

Is it possible to modify?

 

Regards

Highlighted

I would suggest you search the specific Router type and post your questions there. The EEM doesn't appear to have a separate community.

View solution in original post

Highlighted

Thank you for the suggestion.

 

I'll try to open a new topic.

 

Regards

This widget could not be displayed.