06-17-2020 02:31 AM
お世話になります。
下記記事を参考に、Azure上にCSR1000vをHA2台構成で構築しています。
記事ではVRF:GSのデフォルトルートをグローバルルーティングテーブルに広告しています。
>Configuring IOX and the Guestshell on Cisco IOS XE
...
>ip route vrf GS 0.0.0.0 0.0.0.0 GigabitEthernet1 192.168.35.1 global
グローバルルーティングテーブルに上記ルートとは別に静的デフォルトルートを定義したいのですが(別インタフェースをネクストホップとしたい)
~globalのオプションは必須となるものでしょうか?
VRF:GSとグローバルそれぞれでデフォルトルートを持っていれば問題ないと考えますが
アドバイス頂けますと幸いです。
宜しくお願いいたします。
06-17-2020 06:03 PM
Rewrite in English.
Referring to the following article, I am building CSR1000v on Azure with two HAs.
According to the article, VRF: GS advertises a default route to the global routing table.
>Configuring IOX and the Guestshell on Cisco IOS XE
...
>ip route vrf GS 0.0.0.0 0.0.0.0 GigabitEthernet1 192.168.35.1 global
I want to define a static default route in the global routing table apart from the above default route (I want to use another interface as the next hop).
Is the ~global option mandatory?
I think it's ok if VRF:GS and VRF:Global have a default route.
I would appreciate any advice.
Thank you.
06-17-2020 06:43 PM
06-17-2020 11:56 PM
Mr calloes
Thank you for your reply.
For example,Is it possible to rewrite as below?
>ip route vrf GS 0.0.0.0 0.0.0.0 GigabitEthernet1 192.168.35.1 global
↓
>ip route vrf GS 0.0.0.0 0.0.0.0 GigabitEthernet1 192.168.35.1
>ip route 0.0.0.0 0.0.0.0 GigabitEthernet2 x.x.x.x
I understand that VRF:GS's traffic needs for the NAT ,
and I want VRF:GS's traffic to route to gig1, and vrf:global's traffic to route to gig2.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide