cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2149
Views
0
Helpful
2
Replies

Monitoring Rack-unit HDDs via UCS SDK

lopezjairo
Level 1
Level 1

Hello,

I have been working on UCS obtaining MOs and their property values using the Python UCS SDK for monitoring purposes. I have been able to monitor a lot of the equipment but haven't found a particular MO that deals with storage attached to Blades or Rack units. Is it possible to monitor storage via the Python UCS SDK?

Thank you very much for your time!

1 Accepted Solution

Accepted Solutions

ragupta4
Cisco Employee
Cisco Employee

You can use “StorageController” MO.

Under this specific Storage related MOs are as below:

storageDrive

storageLocalDisk

storageVirtualDrive

storageEnclosure

storageLocalDiskConfigDef

storageLocalLun

storageMezzFlashLife

storageOperation

storageRaidBattery

Thanks & Regards

Rahul Gupta

View solution in original post

2 Replies 2

ragupta4
Cisco Employee
Cisco Employee

You can use “StorageController” MO.

Under this specific Storage related MOs are as below:

storageDrive

storageLocalDisk

storageVirtualDrive

storageEnclosure

storageLocalDiskConfigDef

storageLocalLun

storageMezzFlashLife

storageOperation

storageRaidBattery

Thanks & Regards

Rahul Gupta

Hello Rahul,

I had completely overlooked the MOs you mentioned. Thank you very much for pointing them out to me. Using what you wrote I was able to monitor the information I required.

Thank you very much!

Cisco UCS X-Series Energy Efficiency Offer