Add Multiple VLANs for UCS domain(s)

[joemar]

This script allows a bulk load of VLANs via a CSV file into a single or multiple UCS domains.  The ZIP file contains a sample file.  Script can run interactively or silently via command line parameters.

v0.1.01 - Initial version

v0.1.02 - Updated to validate the VLAN CSV file

v0.1.03 - Updated to check for overlaps of VLAN names and numbers against existing UCS domain(s)

[TechGeek]

Joe, thank you so much for this script, it is a life saver!

I made some modifications to it and the CSV, so now after it creates the VLANs they are then added to the appropriate port-channels on the FI's as well!

[joemar]

That's fantastic to hear.  Glad it helped you and you were able to customize it for your specific requirements.  Take care!

[mbrigeotLux]

Hi Joe!

Thanks a lot for the script! It also helped me a lot!

I do not know if it is related to the last version of PowerTool Suite but I had to modify the PowerShell Module that the script is looking for.

From :

Import-Module ciscoUcsPs

To

Import-Module Cisco.Ucs.Core

- I also update the search condition ($Modules -like "Cisco.Ucs.Core") -

The script worked like a charm with this minor correction. Let me know if it is right or not (I see that there is a Cisco.UCSManager module also loaded).

Best,

[sumbr]

Hi Maxence

The UCS PowerTool module names are changed in UCS PowerTool Suite 2.0.1 release. You need to update the script to use the new module names.  You need to change the module name to Cisco.UCSManager

The following table lists the module name changes in this release:

Previous Module Name	New Module Name
CiscoUcsCentralPS	Cisco.UCSCentral
CiscoImcPS	Cisco.IMC
CiscoUcsPS	Cisco.UCSManager

Thanks,

Sumanth.

[mbrigeotLux]

Hi Sumanth!

Thanks for the table! That was exactly my interrogation when I changed the verification to the Ucs.Core module. So now I know that I should check for the UCSManager instead (or maybe both?)

Maybe a new release of the script can be uploaded? > joemar ?

Thanks again!

EDIT: Ok, the Module Names change was described in the Release Notes, sorry to have missed that!

[vmadalik]

Hello Team,

This is a great script - what would i do - to just list the VLANs in the domains?

No central/Director in the Customer ecosystem.

[sumbr]

Hi Vishwajeeth,

You can use the below cmdlet to get the VLANs available in the UCS Domain.

Get-UcsVlan- To get all the fabric level VLANs

Get-UcsAdaptorVlan - To get the VLANs configured on a particular Ethernet interface

Thanks,

Sumanth

[venkatevt]

is there a way i can get that what ever VLANs are in above script i want to test that all VLANS able to respond to ping or so some testing kind of??

[mark-shannon]

great script it's helped a lot :)