
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
on 11-17-2016 10:52 PM
Same like UCS PowerTool Script for UCS C3000/S-Series: Convert all disks to JBOD for UCS Domain(s) this script converts the back-end SSDs and the top-loaded HDDs to Unconfigured-Good for the same environment. Some vendors in Object Storage environments, i.e. Red Hat Ceph Storage uses RAID 0 for each individual disk. The script prepares the disks as it sets them to Unconfigured-Good.
Right now you have to touch each array in UCSM and right click on a bunch of disks to convert to Unconfigured-Good. The script does that step for all disks in a C3260 or S3260 for your whole environment.
P.S.: Thanks to joemar as parts of this script came from his VLAN script.
- Mark as Read
- Mark as New
- Bookmark
- Permalink
- Report Inappropriate Content
Thanks for this! I had to modify for standalone servers, but it worked great. It is available here.