DNA Center Topology - Add unmanaged devices/links

[pinglis]

Is there any way to add an unmanaged device device to topology diagram in DNA Center and manually add a link.

For example I have an Anchor wireless LAN controller connected to a DMZ switch behind a firewall connected to the core switch. Currently the Anchor WLC and DMZ switch are showing separated from the rest of the LAN so I would like to add a device to represent the firewall with links to the DMZ and Core switches.

It is was possible to do this Prime and on the links configured the source port on the switch end of the link.

Another example would be a WAN provider router.

[Mike.Cifelli]

Is there any way to add an unmanaged device device to topology diagram in DNA Center and manually add a link.

-AFAIK this is not supported.  This is because of the order of operations required to have a NAD appear in the topology.  Equipment (NADs) need to be a part of inventory, and then assigned to site.  Once a NAD is assigned to site you will see it in the topology.  

[pinglis]

I hope this will be added in a future version. It could also help with DNA Centers understanding of the network so that for example Path Trace would not fail when it hits the gap.

I have used the Make a Wish option to request it.