01-27-2023 12:57 AM
I configured DNAC with three interfaces:
Management - eno1 - 192.168.100.2/24 with VIP 192.168.100.1 - it's out of band network in my company
Enterprises - enp94s0f0 - 192.168.150.2/24 with VIP 192.168.150.1
Cluster - enp94s0f1 - 192.168.20.2/24 with VIP 192.168.20.1
I have 2 questions:
1. It's normal that DNAC goes to my devices in pool 192.168.100.0/24 via Management interface?
2. I thought that DNAC will go to devices via VIP addresses but it goes via non vip addresses because I added addresses 192.168.100.1 and 192.168.150.1 to my ACL and it isn't work until I add physical addresses 192.168.100.2 and 192.168.150.2
01-27-2023 01:44 AM - edited 01-27-2023 01:45 AM
Hi,
DNAC interfaces work kinda like a router. It will get to the destination subnet over the interface that has a route to it.
If you've put a default route over the MGMT interface and there's no more specific static routes on the enterprise port, then it will go via the mgmt port.
Hope that helps.
Regards.
01-27-2023 01:51 AM
Ok, and what about VIP address? Why DNAC doesn't use VIP for cli and snmp access?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide