Hi Team ,
I am very much confused about BGP table ...I m still not sure it's BGP rib table or BGP routing table ..I came in this situation while performing LAB in eveng. My set up was mpls ( ldp ) core and PE _CE was running EBGP .
CE1______PE1____mpls cloud ( mibgp )_____PE2___CE2
Ce _pe ebgp and ce1_ce2 ibgp and obviously pe1_pe2 bgpvpnv4 via RR ..
On PE 1 I hv used As override to allow route in CE1 and on CE2 I hv used allowed AS in to get route from PE2 ..
I hv advertise loopback of each ce routers in ebgp as well as ibgp ..
- If I m checking bgp table on PE 1 loopback of ce1 and point to point network I m getting only via CE1 only ( denying all the prefix which is coming from Pe2 due to originator code ) but on PE2 I m getting local ce ( ce2) loopback and p2p network from CE2 as well as from PE 1
while debugging on PE1 I checked local route from pe2 denied due to local originated route ?? Can I see this denied route in BGP received route ( bgp rib in) because RR properly advertising those route I can check on rr in advertised route to pe1.
thnks in advance
