Hi all, need some advise here as I've exhausted ideas to have the issue fixed.
The proximity between my Mac and DX70 suddenly refused to work on one fine afternoon without any new software install on mac, configuration changes on dx, nor network changes (home network). it just show "finding video system..." and no error message.
Things i've tried/check:
1. reinstall the proximity app 4.0 on my mac
2. factory reset my dx70
3. downgrade dx70 firmware from 9.15.8.10 to 9.15.3.18
4. upgrade my mac os from big-sur to monterey
5. confirm the built-in microphone is selected as system device.
6. confirm proximity has permission to microphone and its listening to the microphone (based on the mac orange dot at status bar).
on the side note, I've another old mac (2014, catalina) to test the proximity to the dx70 and it worked! so i guess the issue lie on the proximity app/mac os instead of the dx70. Only different I can tell between the 2 mac, is that it will prompt a "certificate has change" message after I install the proximity on catalina, but i did not get this message on my mac os monterey, despite trying to delete & install the proximity app multiple times. could this be the culprit? is there a way that I can remove the proximity app cleanly, so that it will prompt again to accept the certificate fingerprint? I don't want to re-install my mac os just because of 1 proximity app, but without proximity it caused great inconvenient as i rely on it to dial/control & wireless share in meeting.
Any help is appreciated, Thanks in advance.
