Restart switch when enable logging facility

[hunterman]

Hello everyone,

When i enable the command logging facility  and after enabled so the switch automatic go to restart after reboot and opened the ssh on the quickly to disable or remove the command, Below all command and ("192.168.1.25" my syslog server and Switch model 2960x and version 15.0(2a)EX5):

logging facility news

logging host 192.168.1.25

login on-failure log

login on-success log

logging trap informational

Any one can help to solve the problem?

THANKS

[balaji.bandi]

no logging facility news   <-- i do not belive you need this

logging buffered 64000  <-- change the value as per your requirement

logging host 192.168.1.25

login on-failure log

login on-success log

logging trap informational

Save config test and advise.

You still have issue, post show logging

[hunterman · Accepted solution]

Thank you for your replay,

If you can advice me whats the benefit to "logging facility news", After that I tried to upgrade the version from  version 15.0(2a)EX5 to last upgrade Version 15.2(6r)E , After that i tested the all same command in below

logging facility news

logging host 192.168.1.25

login on-failure log

login on-success log

logging trap informational

And the switch worked without any problem, In this time if i apply your command below

logging buffered 64000 <-- change the value as per your requirement

logging host 192.168.1.25

login on-failure log

login on-success log

logging trap informational

After that the switch worked without any problem where the version 15.0(2a)EX5 ? Or i forced to all switches upgrade to last Version 15.2(6r)E .

[balaji.bandi]

logging facility news   ( do you really need this usenet ?)

News	USENET news

if the solution is resolved can you mark as resolve so it will be usefull for other community members,.

[hunterman]

If you can explain me whats the benefit to "logging facility news" ? or logging facility USENET news ?

[balaji.bandi]

High level :

NEws - Log Messages regarding USENET  news processes

If you like to more about technology, would nice to spend some time on RFC

https://tools.ietf.org/html/rfc5424

https://en.wikipedia.org/wiki/Usenet

[hunterman]

I'm solved the problem when upgrade the switch version from 15.0(2a)EX5 to Version 15.2(6r)E . 

If any one have the same problem please upgrade because the version 15.0(2a)EX5 have bug in software version .

THANKS