4507R+E booting issue

[neonetad]

Hello

when I poweron device it goes to rommon, try these:
boot, flash_init and nothing happened, then realize there is IOS image and also ip add, gw, tftpsrv

So I think the problem is device cant find the img IOS for booting route or something like that. 

there are two img in attache too.

best regards

[balaji.bandi]

rommon > boot bootflash:cat45xxxxxxxxxxxxxxxxx.bin

follow below guide :

https://www.cisco.com/c/en/us/support/docs/routers/4000-series-routers/15072-recovery-4500-4700.html

once booted make sure confreg set to 

confreg 0x2102

also check show boot - make sure path correctly set.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/12-2/31sga/configuration/guide/config/rommon.html#wp1013959

[neonetad]

Thank you, yet problem still remains.
boot folder of device is filled with corrupted ios image, so I delete it. Then using usb to boot new ios.
but problem is when I reload the device, it goes to rommon so I think the problem is directory of boot img is empty after deleting corrupted img, how can I move new one to exact directory?

To be exact: I installed new ios from usb. then cli, then reloading and go back to the first place.