05-15-2024 06:15 AM
How to see what ROMMON variables are set while in a working 9K IOS-XE CLI? Remember sh ver no longer works on these.
Based on reading below links, it appears that 9K devices no longer have the ability to show the ROMMON boot variables from IOS CLI. As best I can tell, that means that it is a crap shoot to put on new IOS images and expect the machine to come back correctly. Yes we are a largish shop with more than 1000 (not counting stack members) of these devices. And yes sometimes the switches are "password recovered" and people forget to set the ROMMON variables back correctly.
https://community.cisco.com/t5/routing/0x102-or-0x2102/td-p/1550923
https://community.cisco.com/t5/switching/cat-9200-config-register/td-p/4388533
Solved! Go to Solution.
05-15-2024 04:12 PM
@wags wrote:
Based on reading below links, it appears that 9K devices no longer have the ability to show the ROMMON boot variables from IOS CLI.
show romvar
05-15-2024 04:12 PM
@wags wrote:
Based on reading below links, it appears that 9K devices no longer have the ability to show the ROMMON boot variables from IOS CLI.
show romvar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide