06-10-2024 07:15 AM
Hi there,
I have some Cat3k's to upgrade to cat3k_caa-universalk9.16.12.10a.SPA.bin
I am upgrading some from 03.06.04.E RELEASE SOFTWARE (fc2)
and
16.12.5b, RELEASE SOFTWARE (fc3)
is there a way I can do this without the switches auto reloading?
I am using this command when upgrading from 16.3.6, RELEASE SOFTWARE (fc3) and it works fine:-ndit works fine,
request platform software package install switch all file flash:cat3k_caa-universalk9.16.12.10a.SPA.bin new auto-copy
I am following this guide:-
But it seems that a reboot is automatically carried out when upgrading from those other two Images.
Anyone know if it's possible to upgrade the IOS and then I can set a reboot for a time that suites the business with a reload at x-y-z command?
Many thanks in advance
Matt
06-10-2024 01:18 PM
is there a way I can do this without the switches auto reloading?
No that is no possible, you need to reload the device/stack to get effective of new software image.
you following the right guide
06-10-2024 03:24 PM
@mmjcollett wrote:
is there a way I can do this without the switches auto reloading?
Nope.
@mmjcollett wrote:
Anyone know if it's possible to upgrade the IOS and then I can set a reboot for a time that suites the business with a reload at x-y-z command?
Yes, use the "on-reboot" option. NOTE: The "on-reboot" is actually a bug (CSCve94966). It is meant to be "no-reboot" and Cisco will not be fixing this bug because it is not a "recommended" method.
Please read Cisco 3850: IOS-XE/Firmware Upgrade
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide