08-22-2020 11:45 AM
Hello;
I want to Upgrade my Cisco ASA5516X Firepower (FMC)'s 6.2.2 to 6.4.0.9 version;
I want to ask:
Is this a risky process, if upgrade fails is my device or FMC software lost. Thanks...
Solved! Go to Solution.
08-22-2020 02:45 PM
We are not clear, is the ASA running FTD Code or ASA running with SFR Module?
Either case here is upgrade procedure :
https://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade/planning.html
Notes :
1 read the release notes and understand the bugs
2. back up the config - out of the box
3. FMC needs to higher version always - so required first upgrade. ( check the compatibility matrix)
4. required maintenance window to reboot. after upgrade.
08-24-2020 02:24 AM
it should be equal or higher (not Lower) - Look at the Matrix to support FTD version.
08-22-2020 02:45 PM
We are not clear, is the ASA running FTD Code or ASA running with SFR Module?
Either case here is upgrade procedure :
https://www.cisco.com/c/en/us/td/docs/security/asa/upgrade/asa-upgrade/planning.html
Notes :
1 read the release notes and understand the bugs
2. back up the config - out of the box
3. FMC needs to higher version always - so required first upgrade. ( check the compatibility matrix)
4. required maintenance window to reboot. after upgrade.
08-24-2020 02:04 AM - edited 08-24-2020 02:07 AM
Hello;
We use FTD code.
I want to additional ask. May Device and FMC version equal or everytime FMC version must higher. Thanks...
(I plan Device and FMC both upgrade to 6.4.0.9)
08-24-2020 02:24 AM
it should be equal or higher (not Lower) - Look at the Matrix to support FTD version.
08-26-2020 01:57 AM
Thanks Balaji for your help...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide