Cisco 2960S-48FPS-L software upgrade

[Antony.xavier]

Hi Team,

I am trying to upgrade Cisco Cisco 2960S-48FPS-L software version from 12.2(55)SE7 to 12.2(55)SE13, when I try to copy the file from the SCP (IP address 10.0.8.200) to the Flash I got the below error:

%Error opening scp://network@10.0.8.220/c2960s-universalk9-mz.122-55.SE13.bin (Protocol error)

Could you please help me to how to get this issue resolved.

Please note: We are not using TFTP for file transfer.

Regards,

Antony Xavier.

[Kasun Bandara]

check few things.

1. make sure SCP server is running

2. check if SCP is blocked by network firewall or server's internal AV/FW

3. make sure connectivity is ok to server

[Antony.xavier]

Hello Kasun,

1. SCP is running fine, I am able to push file from SCP to another Cisco switch model 9300-24T

2. There is no block in the firewall or server.

3. Connectivity to SCP server is fine.

Regards,

Antony xavier