CISCO ASA VERSION CONFUSION REG

[NAGA99]

Hi All,

We have Cisco ASA 5555 running the code 9.16(1) however in the Cisco.com portal says the latest code is only 09.14. I got confused. 

show ver

Cisco Adaptive Security Appliance Software Version 9.16(1)
SSP Operating System Version 2.10(1.159)
Device Manager Version 7.16(1)

Compiled on Thu 20-May-21 17:26 GMT by builders
System image file is "disk0:/asa9-16-1-smp-k8.bin"
Config file at boot was "startup-config"

Hostname is up 5 hours 28 mins

Hardware: ASA5555, 16384 MB RAM, CPU Lynnfield 1403 MHz, 1 CPU (8 cores)
ASA: 8469 MB RAM, 1 CPU (2 cores)
Internal ATA Compact Flash, 8192MB
BIOS Flash MX25L6445E @ 0xffbb0000, 8192KB

• No support in ASA 9.15(1) and later for the ASA 5525-X, ASA 5545-X, and ASA 5555-X—ASA 9.14(x) is the last supported version. For the ASA FirePOWER module, the last supported version is 6.6.

https://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asamatrx.html

• ASA 9.14(x) was the final version for the ASA 5525-X, 5545-X, and 5555-X.

https://www.cisco.com/c/en/us/td/docs/security/asa/asa916/release/notes/asarn916.html#topic_utd_jgz_vhb

•  

[balaji.bandi]

Hostname is up 5 hours 28 mins  - You have loaded the new ASA  Code and its working (its puzzled based on the information)

is this working as expected and Live (or just Lab testing ?)

[NAGA99]

The 9.16 is running for quite sometime.

As per the Cisco recommendation, I want to upgrade from 09.16 to 09.18.

[wayfaring]

Anyone care to comment on results with 9.16 or 9.18 on 5525-X, 5545-X, 5555-X?

[balaji.bandi]

Not sure where this recommendation come from : Look at the download page, i do not see that version at all, or am i missing something here on the hardware model

https://software.cisco.com/download/home/284143129/type/280775065/release/9.14.4%20Interim

if this is not happy contact same Cisco recommendation or TAC provide the download link.