CISCO UCS 6120XP Kickstartfile

[NyanNyan]

Dear Technicians !

I bought a CISCO UCS 6120XP Switch from Ebay, and i am proud to have it now :-)

But i need a Kickstart file for it cause it seems to be completely empty.

loader> dir     outputs

Error: No Devices Found

Cisco Support Team directed me here to the Community

Because my Switch is  EoS End of support on date- 31-MAR-2018

Maybe someone can help me here.

Also i would like to ask for the UCS Manager Software pls.

regards NyanNyan

PS: TFTP server is ready for the File ^^

[balaji.bandi]

Do you have CCO account you can download, or try google (Luck always favors).

[NyanNyan]

Hi thank you for replying me, i dont have a download account :-(

and in google i search for hours.... i also send cisco support at least
10 emails

all i would like to do is:

Put the bin file in my qnap hosted tftp and come further with the ucs unit.

i am no professional but i try my best learning.. problem is i wasted at
least 3 hours on cisco support emails ^^ and now i stuck at loader>   
and cant get further

noone can tell where to get the file,

if i have it if it will boot, but will it write into flash?
if i can then start in gui on the mgmt0 port i setted up?

Could you evtually download it for me pls ?

Greetings from Vienna

NyanNyan

[balaji.bandi]

Cisco Support do not support if you do not have a contract, that too purchased from ebay.

[NyanNyan]

What can i do now to get this baby running?

NyanNyan

[balaji.bandi]

Either contact the eBay seller to offer some support to get the file if he has access to the cisco CCo account download for you.

The official answer is, this device is like a showcase on your rack for now.

[NyanNyan]

hmm i am not the only one that have this switch, maybe somen can send me
a DL Link for that file :-)

i dont giveup on this Switch <- wanna see it running

maybe someone can help me out here.

NyanNyan


PS: I emailed Ebay seller about the situation he brought me into ^^ <-
he didnt said that it have an empty flashrom

[NyanNyan]

After open the Switch, and ther were more then 50 screws

i found out that there is no eUSB Module installed.

Thanks eBAY Seller for not telling it to me...but you tested it well, lol.

If i would consider to buy a Module  pls what size should i choose 2 4 or 8 GB.

NyanNyan

[balaji.bandi]

eBay testing not the equipment they power on if that working they put online to sell.

Never Tried opening FI (even though we installed many, it needs big space, so try higher size if that support.

i do not remember i had to format some time back that took for while keeping that in mind.

Good luck.