configuring daily switch and firewall backups prime 3.7

[atkinson74paul]

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-8/admin/bk_CiscoPrimeInfrastructure_3_8_AdminGuide/bk_CiscoPrimeInfrastructure_3_8_AdminGuide_chapter_010.html#id_22604

Will Prime 3.7  back up Switch config and firewall also on a daily bases ? 

[balaji.bandi]

yes it does if you have right License and configured.

suggesdt to use 3.10 (3.7 is old and EOL) - PI 3.10 also getting faded soon.

[atkinson74paul]

Thank you for reply BB ,It is good to know it is possible, Is there any documentation on how to configure the switch and firewall backups ?

[balaji.bandi · Accepted solution]

look at the config guide :

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-7/admin/guide/bk_CiscoPrimeInfrastructure_3_7_AdminGuide/bk_CiscoPrimeInfrastructure_3_7_AdminGuide_chapter_0101.html#con_1077702

video for reference :

https://www.youtube.com/watch?v=anieuRwCvjI

[atkinson74paul]

Thanks BB for your help but I think there maybe some limitations still on my license

as I am still unable to select backup switch configuration 

[atkinson74paul]

it will not allow me to select repository for Device Config Backup 

[atkinson74paul]

My apologies I have finally configured these Archive Jobs  your vids and Docs did help BB .