cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
247
Views
0
Helpful
1
Replies

Copy using SCP from Windows(10) Server to Cisco Switch

Larryb61
Beginner
Beginner

Hi Team,

I am copying a binary from a Windows Version 10 (source) to my Cisco Switch (target). Here is the output

//Doing this from the Cisco side

test-c99-e0541-fs9148a# copy scp: bootflash:
Enter source filename: C:\VCAN\Cisco\9148S\m9100-s5ek9-kickstart-mz.8.4.2d.bin
Enter hostname for the scp server: 10.99.8.44         <<<<<<<<<<<<<<<<< IP of windows
Enter username: ljadmin
ssh: connect to host 10.99.8.44 port 22: Connection timed out

Is there any services or Firewall settings I need to start or set?

I have tried using WinSCP from the Windows server to the cisco switch, but that does not work either.

 

Thank you

1 Accepted Solution

Accepted Solutions

Kasun Bandara
VIP Advisor VIP Advisor
VIP Advisor

check if any firewalls enabled in PC. disable for testing if any. make sure connectivity between switch and PC is availabe

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

View solution in original post

1 Reply 1

Kasun Bandara
VIP Advisor VIP Advisor
VIP Advisor

check if any firewalls enabled in PC. disable for testing if any. make sure connectivity between switch and PC is availabe

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers