Solved: Re: How to Broadcast packets in a LAN?

ictolal2020 · ‎11-22-2022

How to send a packet from LAb01-PC01 to all host in CLab01? Could you explain to how to implement this?

ammahend · ‎11-22-2022

you can just ping the broadcast address of the subset from LAb01-PC01, when the broadcast gets to switch, it will forward it to all ports and will flood till router interface (your Layer 3 boundary). you can also enable "debug ip packet" on router to make sure your broadcast packet is getting there, assuming this is a lab, would not suggest you doing this in production.

-hope this helps-

View solution in original post

ammahend · ‎11-22-2022

you can just ping the broadcast address of the subset from LAb01-PC01, when the broadcast gets to switch, it will forward it to all ports and will flood till router interface (your Layer 3 boundary). you can also enable "debug ip packet" on router to make sure your broadcast packet is getting there, assuming this is a lab, would not suggest you doing this in production.

-hope this helps-

ictolal2020 · ‎11-22-2022

Thank you so much. In practically, how to send message?

ammahend · ‎11-23-2022

can you elaborate your question, not sure i understand what you are asking.

-hope this helps-