HI there,
I am installing new ASR1001-HX devices and I am dealing with the licenses. The current status for feature interface_1g is what I am concerned about. It shows as follows:
sescqrt01nt00fm_ASR#sh lice all
License Store: Primary License Storage
StoreIndex: 0 Feature: adventerprise Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
StoreIndex: 1 Feature: interface_1g Version: 1
License Type: Permanent
License State: Active, Not in Use
License Count: 2/0/0 (Active/In-use/Violation)
License Priority: Medium
StoreIndex: 14 Feature: interface_1g Version: 1.0
License Type: EvalRightToUse
License State: Active, In Use
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 2 days
Period used: 1 day 23 hours
Transition date: Jan 27 2019 14:09:18
License Count: 1/0 (In-use/Violation)
License Priority: Low
router#sh ver
Cisco IOS XE Software, Version 16.09.02
Cisco IOS Software [Fuji], ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.9.2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Mon 05-Nov-18 19:31 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2018 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
router uptime is 55 minutes
Uptime for this control processor is 56 minutes
System returned to ROM by Reload Command at 12:30:47 CET Fri Nov 30 2018
System restarted at 12:33:44 CET Fri Nov 30 2018
System image file is "bootflash:asr1000-universalk9.16.09.02.SPA.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Type: Permanent
License Level: adventerprise
Next reload license Level: adventerprise
The current crypto throughput level is 0000000 kbps
Smart Licensing Status: Smart Licensing is DISABLED
cisco ASR1001-HX (1SR) processor (revision 1SR) with 1191271K/6147K bytes of memory.
Processor board ID TTM22287466
Crypto Hardware Module absent
8 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
27762687K bytes of eUSB flash at bootflash:.
0K bytes of WebUI ODM Files at webui:.
Configuration register is 0x2102
router#sh ip int b
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0/0 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/1 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/2 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/3 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/4 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/5 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/6 unassigned YES NVRAM administratively down down
GigabitEthernet0/0/7 2.20.2.2 YES NVRAM up up
Te0/1/0 unassigned YES NVRAM administratively down down
Te0/1/1 unassigned YES NVRAM administratively down down
Te0/1/2 unassigned YES NVRAM administratively down down
Te0/1/3 unassigned YES NVRAM administratively down down
Te0/1/4 unassigned YES NVRAM administratively down down
Te0/1/5 unassigned YES NVRAM administratively down down
Te0/1/6 unassigned YES NVRAM administratively down down
Te0/1/7 unassigned YES NVRAM administratively down down
GigabitEthernet0 unassigned YES NVRAM administratively down down
Loopback0 1.10.10.10 YES NVRAM up up
When I try to do a reload, I receive the following message:
router#reload
The following license(s) are transitioning, expiring or have expired.
Features with expired licenses may not work after Reload.
Feature: interface_1g ,Status: transition, Period Left: 8 wks 2 days
Proceed with reload? [confirm]
Will this be a problem in 8 wks? Or will it be automatically be activated without impact?
Will I be able to use all ports from G0/0/0 to 0/0/7 ?
Thanks in advance for your reply!
