07-11-2019 03:59 AM
Hello
My ASA 5512-x is unable to boot due to above-mentioned incident.
It keeps on looping and returning the same error message
I tried to boot it in ROMMON but nothing positive happed
Can you please help me with regard?
Do I need to reload the software or what?
07-11-2019 04:59 AM
First question, how this FW got in to ROMON, is this part of Upgrade or Crashed ?
Can you post complete logs, so we can suggest to boot from TFTP to get working ?
07-11-2019 05:18 AM
Hi BB
FW tries to boot on normal mode, but it fails with the aforementioned incident
That's why I tried to boot it on ROMMON to see if it can boot
07-11-2019 05:46 AM
Do you have access to console, so can you post full logs of boot process. so we can identify the issue,
is that because no image or flash failed ?
07-11-2019 06:17 AM
07-11-2019 09:00 AM
hi
I tried to boot FW from tftp but it also failed with the following error
''''''''''''
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Received 16459776 bytes
Launching TFTP Image...
Execute image at 0x14000
Cisco Security Appliance admin loader (3.0) #0: Mon Jan 11 14:23:33 MST 2010
Platform F1-GENERIC
Loading...
i2c_read_byte_w_wait() error, slot = 0x4, device = 0xb0, address = 0 byte count = 1. Reason: I2C_SMBUS_UNSUPPORT
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
open /dev/hda1:No such device or address
dosfsck(/dev/hda1) returned 1
mount: mounting /dev/hda1 on /mnt/disk0 failed: No such device or address
mount: mounting /dev/hda1 on /mnt/disk0 failed: No such device or address
Set 'tap0' persistent and owned by uid 0
lina_bigphysarea_size: open /proc/bigphysarea failed, error 2
07-11-2019 09:09 AM
Follow the below procedure boot from TFTP, try fsck or format flash. ( hope you have backup config,. you can restore once it booted normally).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide