Hi,
I need to deploy a Private VLAN and a couple of standard VLANs on a switch, which has IOSXE 16.12.02; the pVLAN (the Primary one) and the standard VLANs all need to be trunked out of the same port that connects to a router.
I've done some research and I see that this is possible for IOS XE Amsterdam 17.3.x:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-3/configuration_guide/vlan/b_173_vlan_9300_cg/configuring_private_vlans.html#topic_ebd_cfy_ngb
(See here: "Example: Configuring a Layer 2 Interface as a Promiscuous Private VLAN Trunk Port").
But I am stuck with IOSXE 16.12.02, and I can't find a clear reassurance that this is possible; I found this:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-12/configuration_guide/vlan/b_1612_vlan_9300_cg/configuring_private_vlans.html#id_97285
(See the Note: "Trunk ports carry traffic from regular VLANs and also from primary, isolated, and community VLANs.").
Does anyone know whether this is 100% possible with my IOSXE? Any evidence online, please? (No suggestions to upgrade IOS please).
Thanks,
Luca
