Switch me3400

[myahia2019]

I have me3400 when I connect an pc cable or a phone cable it's not connect to the network i delete everything in the switch and the same problem still there 

[balaji.bandi]

need more information to identify the issue.

1. if you connect the PC or Phone is the device port come up green color, is there any other ports work on the device ?

2. what you see on the console  with show interface x/x ?

post show run config

[myahia2019]

 no color appear on the ports with cables only the port that is connected to another switch 

 

[balaji.bandi]

what port are you connected to? most of the ports show as shutdown or nni ports.

connect to one of the port no shutdown on the interface

config t

interface gig 0/11

switchport

no shutdown

!

end

[myahia2019]

I did this and also there is no any new

One of the ports connected to a internet and other ports connected to pc and phone, there no internet on the pc and no settings in phone. 

[balaji.bandi]

other ports connected to pc and phone

do you mean   Port---Phone--PC ( or PC and Phone conenct 2 different ports)

Do not post screen shot :

post below full config :

show run

show interface status

Note : give where the PC or Phone connected ? for now you have only 1 VLAN1, there i no voice vlan configured. but as i said port show come up if you issued no shutdown.

[myahia2019]

I mean I tried both connecting a pc and then a phone and the same thing is happening. The switch isn't receiving and packets but it's sending packets.

Yes there is no voice vlan. The voip config is coming from another branch.

The issue exactly is the internet cable is connected to the switch and the pc isn't receiving any data or packets from the switch. In the pc is says pc connected to a network but there no internet 

[balaji.bandi]

the orginal post was only mentioned port not coming up  or not connecting to the network ?

now you mentioned, the port up and there is no internet ?

Let me ask again below information - we can not read any more brain here.

post below full config :

show run

show interface status

[myahia2019]

 

 

 sorry for being late, here is the show run and interface status 

[balaji.bandi]

NOTE: I WON'T BE ABLE TO HELP YOU MUCH HERE, POST TEST OUTPUT IS REQUESTED.

post below full config :

show run

show interface status

AS PER ONE OF YOUR SCREEN SHOT SHOW ONLY 1 PORT UP