I bought a switch 2960x-24ts-l. The seller says that he cannot update it to ios version 2022 because the 2017 switch may not come up with ios 2022 due to the old hardware.is this true?
Hi,We have a new installation of DNAC - Version 2.2.3.5The issue I have is with some, not all IOS updates to 2960X/XRs which fail the pre-check with the following messages:Unable to download file using HTTPs and SCP.The certificates are installed and...
All our users after installing Cisco Jabber, their imported Outlook Org Box certificates are removed and have to be re-added after every start up.Has anyone else ran into this issue, or does anyone know a fix for this?
Due to a compliance requirement, I need some database information from the CMX appliance - AIR-MSE-3365-K9.
Information we need:
"Total Tables:
Total fields:"
Appliance information: AIR-MSE-3365-K9 CMX
version image: 10.3.1-35
Operating System: Lin...
Will pushing a firmware update to the active switch also apply the firmware to the standby-hot? or does the firmware need to pushed to both switches in the stack?
this issue was fixed by applying the below steps:Authentication issue was causing switches to be not discovered properly. This was resolved by correctly configuring SNMP.PM data was still not being collected properly because ES indices were taking up...
Hi Team,I am copying a binary from a Windows Version 10 (source) to my Cisco Switch (target). Here is the output//Doing this from the Cisco sidetest-c99-e0541-fs9148a# copy scp: bootflash:Enter source filename: C:\VCAN\Cisco\9148S\m9100-s5ek9-kicksta...
Hi All, have 3 different models of cisco switches I need to upgrade the IOS but I can't use the TFTP server. please share if you have other ways to do this. Thanks,Yared
hello experts,i have made an integration between ise and fmc , made pxgrid integration which is successfully runningfmc can only retrieve active directory users to use in access control policies , but if i created an internal user in ise , it can't b...
Hi All, How can I best format my POST request for CompressedClientLog? CompressedClientLog—Post Compressed Log to Finesse - Finesse - Document - Cisco DevNetCompressedClientLog—Post Compressed Log to Finesse var data = new FormData();
var logObj = '<...
Recently installed this ASA Version on firewalls :asa9-12-4-50-smp-k8.binThat version seems to only accept signed asdm image ( asdm-7181-152.bin ). When trying to start the asdm.jnlp file I get the following error -> see attachment cisco_asdm_proble...
Hello everyone, i'm so confuse. i've read many document but always confused, need your help. i've two 3850 switch on stack and i need to use BGP when i look i've that i must upgrade ip base to ip service. i've receive pdf with information L-3850-RTU=...
Hallo,I would like to use GNS3 to model some labs. Courtesy of my company, I have access to the Cisco sofware images. However, whenever I upload the .bin files to GNS3, I get the 'image not valid' message. Are the images from CML any different/specia...
Regarding the EOS deadlines on our two SW versions present on the N9K, we find contradictions on the Cisco site:- EOS version NXOS 9.2 (x):Link https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/eos-eol-notice-c51-7...
