04-23-2021 09:23 AM
Comment below with what you think is the correct answer and remember: if you like the question or the ECMS questions initiative, leave a kudo.
See you in a week with the correct answer!
ECMS practice question
Which of the following MX types of routes has the highest priority?
P.S. We will be sharing new practice questions weekly! If you'd like to receive updates when we do, click the "ECMS Practice" label below and then "Subscribe”.
Here you can find previous questions
Solved! Go to Solution.
04-30-2021 07:59 AM
Hey Friends!
Lucky Sandro is off on annual leave today, so I will provide the answer.
This week the answer was ...
B.) Client VPN
Each type of route configured on the MX has a specific priority in comparison with other types of routes. The priority is as follows:
*If no routes are defined, then the traffic is NATed and sent out an active Internet interface. This only occurs while the MX is configured in Routed mode
All information can be found here: https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior
04-23-2021 09:45 AM
04-23-2021 10:14 AM
B > D > C > A
Useful reference doc
https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior
04-23-2021 10:40 AM
B) Client VPN
04-26-2021 07:56 AM
🐝
04-26-2021 08:22 AM
@kYutobi : only Bee or Bumble Bee 😂
04-27-2021 04:59 AM
@inderdeepsingh1 BOTH!!! 😂
04-26-2021 01:39 PM
I'll go with B, D, C then A
1. Directly Connected
2. Client VPN
3. Static
4. AutoVPN
5. Non Meraki VPN
6. BGP
7. NAT
04-27-2021 05:26 AM
Lol, just re-read the question and I put the priority order down 😂😂
defo read the questions carefully in the exam - it can cost you!
04-30-2021 07:59 AM
Hey Friends!
Lucky Sandro is off on annual leave today, so I will provide the answer.
This week the answer was ...
B.) Client VPN
Each type of route configured on the MX has a specific priority in comparison with other types of routes. The priority is as follows:
*If no routes are defined, then the traffic is NATed and sent out an active Internet interface. This only occurs while the MX is configured in Routed mode
All information can be found here: https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior
04-30-2021 08:03 AM
B thankful its B)ank Holiday UK Weekend!!!!!
04-30-2021 08:08 AM
@DavidLowe Thanks, we all get that right 🙂
04-30-2021 08:10 AM
Maybe only us B rexit Bods
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide