cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
11828
Views
30
Helpful
12
Replies

ECMS Practice Question - April 23rd

SandroNa
Cisco Employee
Cisco Employee

Comment below with what you think is the correct answer and remember: if you like the question or the ECMS questions initiative, leave a kudo.

See you in a week with the correct answer!

ECMS practice question

Which of the following MX types of routes has the highest priority?

  1. Non-Meraki VPN Peers
  2. Client VPN
  3. AutoVPN Routes
  4. Static Routes

P.S. We will be sharing new practice questions weekly! If you'd like to receive updates when we do, click the "ECMS Practice" label below and then "Subscribe”.

Here you can find previous questions

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.
1 Accepted Solution

Accepted Solutions

DavidLowe
Cisco Employee
Cisco Employee

Hey Friends!

Lucky Sandro is off on annual leave today, so I will provide the answer.

This week the answer was ...

B.) Client VPN

Each type of route configured on the MX has a specific priority in comparison with other types of routes. The priority is as follows:

  1. Directly Connected
  2. Client VPN
  3. Static Routes
  4. AutoVPN Routes
  5. Non-Meraki VPN Peers
  6. BGP learned Routes
  7. NAT*

*If no routes are defined, then the traffic is NATed and sent out an active Internet interface. This only occurs while the MX is configured in Routed mode

All information can be found here: https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior

View solution in original post

12 Replies 12

andburne
Cisco Employee
Cisco Employee
Spoiler
B-elieve its Client VPN then Static Routes then Auto VPN Routes then Non-Meraki VPN Peers

MerakiGnome
Meraki Community All-Star
Meraki Community All-Star

B > D > C > A

Useful reference doc

https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior

Darren OConnor
https://www.linkedin.com/in/darrenoconnor

inderdeepsingh1
Level 11
Level 11

B) Client VPN

Cisco Awarded Blogs 2020/2021 https://www.thenetworkdna.com/

kYutobi
Level 11
Level 11

🐝

Enthusiast

@kYutobi : only Bee or Bumble Bee 😂

Cisco Awarded Blogs 2020/2021 https://www.thenetworkdna.com/

briangallagh@gmail.com
Frequent Visitor
Frequent Visitor

I'll go with B, D, C then A

1. Directly Connected

2. Client VPN

3. Static

4. AutoVPN

5. Non Meraki VPN

6. BGP

7. NAT

Lol, just re-read the question and I put the priority order down 😂😂

defo read the questions carefully in the exam - it can cost you!

DavidLowe
Cisco Employee
Cisco Employee

Hey Friends!

Lucky Sandro is off on annual leave today, so I will provide the answer.

This week the answer was ...

B.) Client VPN

Each type of route configured on the MX has a specific priority in comparison with other types of routes. The priority is as follows:

  1. Directly Connected
  2. Client VPN
  3. Static Routes
  4. AutoVPN Routes
  5. Non-Meraki VPN Peers
  6. BGP learned Routes
  7. NAT*

*If no routes are defined, then the traffic is NATed and sent out an active Internet interface. This only occurs while the MX is configured in Routed mode

All information can be found here: https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior

B thankful its B)ank Holiday UK Weekend!!!!!

@DavidLowe Thanks, we all get that right 🙂

Cisco Awarded Blogs 2020/2021 https://www.thenetworkdna.com/

Maybe only us B rexit Bods