cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
345
Views
2
Helpful
3
Replies

Wsa Connectivity query

Vishal6
Level 3
Level 3

Hi All,

Need to install WSA model S196 into my network as an Explicit forward proxy. Should i need to connect/configure port M1 for management and P1 for proxy traffic or any other port also.

3 Replies 3

I always set up Management separate from proxy, whether explicit or transparent.

If you want, you can use P1 on the "inside" and put P2 on the "outside", exposed to the internet or in the DMZ.
If you're using the traffic monitor function, you'd hook up T1, and SPAN the switch port your firewall inside interface is plugged into to the port T1 is connected to.

So bare minimum, I would to M1 and P1.

Details here:
https://www.cisco.com/c/en/us/td/docs/security/secure-web/hardware/x96/swa-x96-install.pdf (pdf page 16, document labels it pg 12)


Vishal6
Level 3
Level 3

so M1 and P1 enough to configure explicit forward proxy  ?