I have a problem with Cisco Mobile 8.0 connected to CUCM 8.6. First off, all CUCM PSTN routing is implemented via National Numbering Plan file and works fine for SCCP devices. However, every time I type some number and hit "Dial" from Cisco Mobile for Iphone client there is a noticeable delay which, I think, is an interdigit timeout. Calls get through very fast if a pound (#) sign is appended.
There are no any application/sip dial rules configured. Those don't allow adding anything to the END of numbers. Besides, I hope I'm not expected to re-implement the national plan for jabber by hand.
I think this behavior is not correct. As long as CUCM receives the whole dialed string, it should process it by usual call routing rules.
Meet the Authors Event - Leveraging SBCs to Empower a Changing World of Collaboration
(Live event – Tuesday, 16th, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event will have place on Tuesday 16th, February 2020 at 10hrs PD...
on January 25th and 26th, we're hosting a Technical Enablement Workshop which will guide you through the steps involved in updating your organisation from Jabber and/or Meetings to Webex App.
Very useful for partners and for customers t...
hi Team, we are planning to deploy Multi-Factor Authentication for Jabber. The main requirement is to use MFA over internet (MRA).Is it possible to deploy MFA just for MRA and don't touch impact any on-prem existing setup?Can someone please guide on ...
Looking to expand your professional network? Interested in gaining an edge with exclusive technology insights? Engage with Cisco experts, share feedback on products and connect with peers from across the globe. Cisco Champion 2021 applications are open fo...