CMS LDAP integration

[Ali Alqwasmi]

I am facing issue with CMS integration with LDAP. I tried from Postman and from the CMS GUI.. it seems that the active directory service account is working, but there is something wrong with filters or the mapping.... any advice would be highly appreciated.

[tgaur]

Hi,

What all information you POST on CMS, have you used any mapping? moreover i think it could be some typo error.

Please follow :https://kb.acano.com/content/21/275/en/why-does-my-ldap-sync-fail-with-has-blank-mapped-jid-__-abandoning-sync.html

also : https://cmslab.ciscolive.com/pod4/API/ldap

Regards
Tarun

[Ali Alqwasmi]

Hi Tgaur

i have accessed these links earlier, but no luck

[tgaur]

hi,

the purpose of sending the links was to tell that the issue is with the config you used to integrate the LDAP, please check it. if you think everything is good send the following :

get https://XXX/xx/xx/ldapservers
get https://XXX/xx/xx/ldapmappings
get https://XXX/xx/xx/ldapSources

Regards
Tarun

[Ali Alqwasmi]

Hi...

Sorry for the late reply... please find the attached screenshots for the ldap config on Postman

[Anurag Srivastava1]

Hello,

The filter you have applied in ldapsources is wrong.

It should be the folder path from where you are syncing the users.for example" "memberof=CN=CMS,CN=users,DC=example,DC=com ""

Else mapping looks fine to me.

Thanks

Please rate if it is helpful and mark as accepted solution if applicable...