DNS SRV records for Jabber

[John Huthmaker]

Does anyone have a simple write up on how to set up the SRV records for a presence server using a Windows DNS Server?  I havent been able to find a simple write up.  I imagine it takes all of 5 minutes to configure once you know the exact information to add for DNS entries.

Thanks,
John  

[John Huthmaker]

In case anybody needs this info, I figured it out.   You create an "Other DNS Type", then choose SRV.

The service is _cuplogin

The Protocol is _tcp

The port is 5269

The host offering is either the IP or dns name of your presence server.  Attached below is a picture of the record.

For good measure, you may want to make a second record with the service called _jabber.  I actually created both, but I believe the _cuplogin is the one that jabber is looking at.

[Jaime Valencia]

FYI, the J4W admin guide has that info.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[John Huthmaker]

I read that guide.  It doesnt explain how to create the records, and it doesnt include the correct port number.