64 bit JTAPI client

[cdnadmin]

This document was generated from CDN thread

Created by: Aleksey Feldman on 23-04-2012 01:39:31 PM
Can I install 32bit JTAPI client on Windows 2008 Server 64 bit?  In CUCM 8.5, there is only 32 bit jtapi client avaiable?  What is the difference between 32 bit and 64 bit JTAPI clients?

Subject: RE: 64 bit JTAPI client
Replied by: Sergei Gorbunov on 24-04-2012 12:29:06 AM
There is no 64bit JTAPI client. Yes, you can use 32bit client on 64bit windows machine. This is a quote from "Cisco Unified JTAPI Installation" document (http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/jtapi_dev/8_6_1/installation.pdf)

Windows Platforms
Cisco JTAPI is supported on the following Windows platforms:
• Windows XP (32 bit)
• Windows Vista (32 bit)
• Windows 7 (32 and 64 bit)
• Windows 2003 Server R1 and R2 (32 bit)
• Windows 2008 Server R1 (32 bit)
• Windows 2008 Server R2 (64 bit)
Linux Platforms
Cisco JTAPI is supported on the following Linux platforms:
• AS 3.0
• Red Hat 7.3
• Red Hat Enterprise (32 bit)
• Red Hat 5.5 (64 bit)
Virtualized Platforms
Cisco JTAPI is supported on the following Virtualized platforms:
• Cisco UCS B-Series Blade Servers
– Cisco UCS B440 M1 High-Performance Blade Server
– Cisco UCS B250 M2 Extended Memory Blade Server
– Cisco UCS B250 M1 Extended Memory Blade Server
– Cisco UCS B230 M1 Blade Server
– Cisco UCS B200 M2 Blade Server
– Cisco UCS B200 M1 Blade Server
• Cisco UCS C-Series Rack-Mount Servers
– Cisco UCS C460 M1 High-Performance Rack-Mount Server
– Cisco UCS C250 M2 Extended-Memory Rack-Mount Server
– Cisco UCS C250 M1 Extended-Memory Rack-Mount Server
– Cisco UCS C210 M2 General-Purpose Rack-Mount Server
– Cisco UCS C210 M1 General-Purpose Rack-Mount Server
– Cisco UCS C200 M2 High-Density Rack-Mount Server
– Cisco UCS C200 M1 High-Density Rack-Mount Server
• VMWare ESXi Version 4.0 for Windows 2008 and 2003 Server virtual machines

Subject: RE: 64 bit JTAPI client
Replied by: David Staudt on 24-04-2012 01:59:21 PM
From the 8.6 JTAPI guide:
 
Cisco Unified Communications Manager Release 8.6(1)
This section describes the new and changed features in Cisco Unified Communications Manager Release
8.6(1):
• Account lockout, page 3-1
• EnergyWise Deep Sleep Mode, page 3-47
• FIPS Compliance, page 3-50
• Password expiry, page 3-86
• New JTAPI x64 client for 64-bit operating systems.
 
You will want to make sure the x-bit JTAPI client matches your x-bit JVM, otherwise note that Cisco fully tests only 32-bit client/JVM on 32-bit OS's and 64-bit client/JVM on 64-bit OS's.