Subject: RE: Cisco response to Polycom EagleEye Director Replied by: JOEL FREDERICK on 16-07-2012 08:26:22 PM The EagleEye Director is the best product I've seen from Polycom. The voice-tracking and facial recognition work amazingly well. There is no doubt the benefit this brings to large room video meetings. Have inquired frequently about Cisco developing a similar technology and so far we have no confirmation that this is underway.
Subject: RE: Cisco response to Polycom EagleEye Director Replied by: David Bruun-Lie on 17-07-2012 05:54:10 AM Hi Joel, have you ever tested the EagleEye in a real world meeting scenario? Just curious because the demos I have seen are very rehearsed with participants being very disciplined either always looking directly into the camera or making sure that only one participant is talking. Not quite your average meeting. In addition you have the slightly irritating movement of the camera in the room you are sitting in. On the other hand it is no doubt that the concept is interesting. We are of course always looking at enhancing our products, however we do not give forecasts on new products.
An integrator would be able to make something similar using a C60 or C90 today with two cameras, several microphones and a control system using the codecs API.
The API can give feedback on the microphones signal levels. Sampling these numbers gives which microphone is picking up the most noise and can then trigger a camera preset or setting absolute position to the tracking camera and then switching the layout.
Cheers, David This document was generated from CDN thread
Created by: jarrod sousa on 01-11-2011 09:38:22 PM Just curious what the thoughts are around the new Polycom EagleEye camera Director. i have already been asked if Cisco has a competitive product. i don't know of one directly, but i was thinking if we could do something similar with a C60 codec and multiple cameras. any thoughts or field trials?
HiWe have problem with cisco finesse. While having CAD, we could define timer action and after 1 minute could change the agent state from not ready to ready. Is it possible to have such a feature in finesse to change Ring No Answer ( Not ready) state to r...
We use a AXL script to provision devices for users. After upgrading CUCM from version 11.5 to 12.5, the script stopped working. We found out that the following line causes the problem :Parameter :certificateOperationvalue :Install/UpgradeAccording to the ...
Hello, I am trying to send an HTML request from Finesse to our servicenow instance so that when a call is answered, a ticket gets created automatically with the assigned to populated as the engineer who answered the call. The SNOW instance has a serv...
I'm working on a project that involves allowing users who are connected to a webex event via a touch 10 to take a poll that has been created for the event through event center. My understanding is they cannot take the poll on the touch 10 due to a device ...
Hello, I would like to know if there is a Screenpop Gadget available for Release 12.X (12.0 or 12.5)? I can only find versions till v11.0. Or is it possible to use the Gadget from version 11.0 in 12.X? Regards,Benjamin