Telnet with C20

[cdnadmin]

Subject: RE: Telnet with C20
Replied by: BRIAN STABINGER on 29-08-2012 04:13:52 PM
Where does one find the following file:
http://developer.tandberg.com/web/guest/integrator-modules/crestron-codec-c60c90
 
I get a 'Not Found' when trying this. I am in the same boat, where we need to control a C20 via Telnet. I think I'm just missing something, as I get the same hex string when I connect (does the same via Extron's DataViewer, but not via PuTTy), and cannot figure out how to proceed. Seems simple, but just am missing that one piece!
 
Thanks!

Subject: RE: Telnet with C20
Replied by: Jeremy Tuttle on 29-08-2012 05:02:23 PM

Where does one find the following file:
http://developer.tandberg.com/web/guest/integrator-modules/crestron-codec-c60c90
 
I get a 'Not Found' when trying this. I am in the same boat, where we need to control a C20 via Telnet. I think I'm just missing something, as I get the same hex string when I connect (does the same via Extron's DataViewer, but not via PuTTy), and cannot figure out how to proceed. Seems simple, but just am missing that one piece!
 
Thanks!

 
I'm actually wondering that myself...

Subject: RE: Telnet with C20
Replied by: BRIAN STABINGER on 04-09-2012 10:07:59 AM
Jeremy,

After some minor Binging around, I found the URL has apparently changed:

http://developer.cisco.com/web/telepresence-developer/integrator-modules/crestron-codec-c60c90
This document was generated from CDN thread

Created by: Steven Gauthier on 31-03-2010 08:00:33 PM
Hello,
When I connect to a C20 using a TCP/IP client symbol the codec returns me something like \xFF\xFD\x18\xFF\xFD \xFF\xFD#\xFF\xFD'
What do I have to return to the codec so I can initiate a Telnet communication
Thank you

Subject: RE: Telnet with C20
Replied by: David Bruun-Lie on 06-04-2010 11:42:48 AM
Steven,
download the Telnet version of the Crestron module for the C-series (http://developer.tandberg.com/web/guest/integrator-modules/crestron-codec-c60c90) and look inside. Here you'll find the response codes for setting up a telnet connection.

Best Regards,
David

Subject: RE: Telnet with C20
Replied by: Kurt Geisler on 15-07-2011 11:22:30 PM
Is there a way to post what this hankshaking is.  I don't have the Crestron Systembuilder software so when I try to look into the crestron module to see how you can do this, I can't see to find it.  I am developing an app for the iPad and was having this same issue.  No problem with MXPs just with the C-series.

Subject: RE: Telnet with C20
Replied by: Kurt Geisler on 26-07-2011 06:18:29 PM

Kurt Geisler:

Is there a way to post what this hankshaking is.  I don't have the Crestron Systembuilder software so when I try to look into the crestron module to see how you can do this, I can't see to find it.  I am developing an app for the iPad and was having this same issue.  No problem with MXPs just with the C-series.

Bump.  ??

Subject: RE: Telnet with C20
Replied by: Kurt Geisler on 16-08-2011 06:29:28 PM
Does anybody ever read this thread????