This document was generated from CDN thread
Created by: mohammed bakr on 20-06-2010 01:18:09 PM
I have the cameras connected to a 6000MXP codec, the output of the codec is connected to the Extron Crosspoint switcher for switching.
In the above case if I have my PC,Document camera connected to the cross point switcher for displaying it to the local display.I wanted the
same to be send it to the far end so I take one output from cross point and feed as input to the CODEC.
Now my query was if I feed like the above the output of the codec will be only the camera or it mixes the other inputs also for near end.will their be any loop back issue.
