cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
156
Views
0
Helpful
0
Comments
cdnadmin
Community Member
This document was generated from CDN thread

Created by: Anatoly Fedchik on 04-02-2011 03:53:03 AM
Hello,
 
could you help me, i need to substitute caller name instead of it phone number. I did it but i need change code page to something like extended ascii 8 bit or UFT-8. Can i do it on cisco 2811 voice gateway?
 
Thanks in advance

Subject: RE: ANI field code page
Replied by: Anusha Kannappan on 04-02-2011 06:08:55 AM
Hi Anatoly,

I am not very sure of the ANI field code page that you are referring to in this query. Please brief us your scenario, like where exactly you want the caller name to be used instead of the phone number?

Thanks,
Anusha

Subject: RE: ANI field code page
Replied by: Anatoly Fedchik on 04-02-2011 01:24:02 PM
Hi Anatoly,

I am not very sure of the ANI field code page that you are referring to in this query. Please brief us your scenario, like where exactly you want the caller name to be used instead of the phone number?

Thanks,
Anusha



Hello Anusha,
 
Thank you for your answer. I'll try to explain more clearly. There is such configuration:  CUCM <- ip -> VOICE GW <- e1-> NEC PBX <-> PSTN.
When call coming from PBX, ANI field is set to phone number of the calling party. I need to display name of the calling party on cisco phones. PBX doesnt forward to voice gateway such info.
As I said I performed it by using some TCL script on voice gateway. Of course, I dont need to change ANI field i need to set caller name. The following line in the TCL script "set callInfo(displayInfo) $mytext"  used to  set caller name and I want to know is there any way to display the caller name in other languages. Does it supported?
 

Subject: RE: ANI field code page
Replied by: Yaw-Ming Chen on 04-02-2011 02:36:51 PM
This is a interesting question. I think this question is more for IP Phone but not Tcl.

You can save you Tcl script as UTF-8 encoding. But when you send it to IPPhone will it be accepted or not that's a question. Most of Cisco IP phone support multiple languages. Find a editor that you can save the file in different encoding. Like I am using TextWrangler on Mac, it allows me to save file in UFT-8 and other encoding.
It's not difficult to try. Change IP phone language setting and save file as the UTF-8.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links