Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Created by: Arvind Sharma on 30-09-2011 09:40:28 AM I am sure this has been addressed before, but for some reason I am running into some problems. I have created an Application User with ALL the necessary privelages : Standard CTI Enabled Standard CTI Allow Control All Devices ...and many others. But when I try to take control of one of the device which is NOT in the "Controlled Device" list, I get this exception: com.cisco.jtapi.InvalidArgumentExceptionImpl: Address XXXXXX is not in provider's domain. When I manually add that Device to the "Controlled Device" list, it works. In this case I am using the Provider object to get the Address and Terminal objects for this DN On the other hand, if I create the Terminal using the following, I don't need to add the device manually in the list and I don't get that error. providerCapabilities.getClass().getMethod("canObserverAnyTerminall") I thought obtaining the Terminal object from the Provider would be the same (attribute and functionality wise) as creating one myself. I don't want to create the Terminal object within the code and just obtain it from Provider. What am I missing here ? Thanks! Arvind
Subject: RE: Application User - Device Control Replied by: Arvind Sharma on 30-09-2011 10:07:43 AM Should make it more clearer. I get the list of Terminals for the DN from Provider.getAddress(DN).getTerminals(). I expected the SEP address in the list of Terminals returned. I don't see that SEP address if don't add it in the "Controlled Device" list manually.
I am sure this has been addressed before, but for some reason I am running into some problems.
I have created an Application User with ALL the necessary privelages :
Standard CTI Enabled Standard CTI Allow Control All Devices ...and many others.
But when I try to take control of one of the device which is NOT in the "Controlled Device" list, I get this exception:
com.cisco.jtapi.InvalidArgumentExceptionImpl: Address XXXXXX is not in provider's domain.
When I manually add that Device to the "Controlled Device" list, it works. In this case I am using the Provider object to get the Address and Terminal objects for this DN
On the other hand, if I create the Terminal using the following, I don't need to add the device manually in the list and I don't get that error.
I thought obtaining the Terminal object from the Provider would be the same (attribute and functionality wise) as creating one myself. I don't want to create the Terminal object within the code and just obtain it from Provider.
What am I missing here ?
Thanks! Arvind
Subject: RE: Application User - Device Control Replied by: Abhishek Malhotra on 30-09-2011 10:31:32 AM Hi Arvind, There are two ways in which application can control a device: 1. Control device which is added to the control list. This device can be obtained using provider.getTerminals() API. or provider.getAddresses() and then invoking Address.getTerminals() API on the retrieved address. 2. Alternatively, application can associated "Standard CTI Allow control of all devices", when it does that then application has priveleges to control any device without adding it explicitly to the control list. However, such application needs to dynamically control device. This can be done by such applications by invoking provider.createTerminal() API by passing device name to it (eg. SEPXXXXXXXXXX). Once application invokes provider.CreateTerminal() API, that device is dynamically given control of that device even if it is not in its control list. Such device would then be returned by APIs in #1 (eg. provider.getTerminals()) Regards, Abhishek
Subject: RE: Application User - Device Control Replied by: Arvind Sharma on 30-09-2011 11:17:04 AM That explains it ! I misunderstood the meaning of "Standard CTI Allow Control of All devices". Didn't realize that for that to play in, I need to create the terminal from the Provider and then use it. Makes it clear now. Thanks very much for such a prompt reply and help ! Thanks! Arvind
Hi Arvind,
There are two ways in which application can control a device:
1. Control device which is added to the control list. This device can be obtained using provider.getTerminals() API. or provider.getAddresses() and then invoking Address.getTerminals() API on the retrieved address. 2. Alternatively, application can associated "Standard CTI Allow control of all devices", when it does that then application has priveleges to control any device without adding it explicitly to the control list. However, such application needs to dynamically control device. This can be done by such applications by invoking provider.createTerminal() API by passing device name to it (eg. SEPXXXXXXXXXX). Once application invokes provider.CreateTerminal() API, that device is dynamically given control of that device even if it is not in its control list. Such device would then be returned by APIs in #1 (eg. provider.getTerminals())
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: