cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
62
Views
0
Helpful
0
Comments
cdnadmin
Level 11
Level 11
This document was generated from CDN thread

Created by: Andy Wander on 30-08-2010 09:02:29 PM
A few questions regarding a C20 being used in an integrated AV system:
(I know it is not meant for this use, but I need to do it). It will have TC3.1 software, or later.

1) Can the EC on the Mic inputs be switched off?

2) Can the sensitivity of the Mic inputs be changed?

3) Can the line-level inputs be routed so that they go only to the far end, or do they always feed the line outs as well?

40 Is there a pinout available on the 117727 serial adapter cable?(the one that allows serial control of the codec, while the codec is connected for serial control of the camera)

Andy

Subject: RE: c20 integration
Replied by: Roger Boe on 31-08-2010 03:52:45 PM
Hi Andy,

A lot of the functionality you are asking for is functionality you will find in our integrator codecs (C40, C60 and C90). Since the C20 is not an integrator codec you will not have all these features available.

1) Echo Cancellation cannot be turned off.

2) No.

3) No, they will always feed the line outs as well.

4)  Have a look at this post: C20 serial

Best regards
Roger
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links