cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
119
Views
0
Helpful
0
Comments
cdnadmin
Community Member
This document was generated from CDN thread

Created by: Chikeobi Njaka on 21-08-2011 04:08:28 AM
Hi,
I need to change the Caller ID of a call from a CTI Route Point and or CTI Port to a terminal. In my scenario:
CTI Port Calls A (4100)
CTI Route Point (5100) Calls B (6100)
Call B is redirected to CTI Port
CTI Port conferences A and B
 
What I need to do is to have the original call placed to B show not the DN of the CTI Route point, but the DN of A. In other words, terminal with 6100 should show incoming call from 4100.
 
Is this possible?

Subject: RE: Calling Number Modification
Replied by: Mohan Potluri on 21-08-2011 06:49:48 PM
One way to do it is to use the select route API that allows chaning the calling number. Instead of directly calling B from CTIPort, call a RP and use the following API specifying DN of A for modifyingCallingNumber, B for routeSelected.
 

<pre>void selectRoute(java.lang.String[] routeSelected,
                 int callingSearchSpace,
                 java.lang.String[] modifyingCallingNumber)
                 throws javax.telephony.PrivilegeViolationException,
                        javax.telephony.MethodNotSupportedException</pre>
<pre>
</pre>
<pre>You need to register the RP and register a route call back. When a call is offered, application will get a ROUTE event and application can call the above selectRoute API. </pre>
<pre>Let us know if it resolves the issue.</pre>

Subject: RE: Calling Number Modification
Replied by: Bruno Rosenberger on 27-09-2011 03:12:29 AM
Hi
You described, how the calling number can be changed with the selectRoute API. This needs a registered Route Point to make the calls through it.
You also mentioned, that the selectRoute API is only one way to do this. My question is, what are other ways to accomplish this task? - Thank you.

Subject: RE: Calling Number Modification
Replied by: David Staudt on 28-09-2011 05:34:06 PM
If you need to modify the calling party number, using selectRoute and a CTI Route Point is the only way to do it in Cisco JTAPI.

Subject: RE: Calling Number Modification
Replied by: Stephan Steiner on 05-10-2011 03:44:45 AM
David - this is something I think should've been added a long time ago, and I don't quite understand why no PBX I know offers this feature.
Adding a caller name to a call (other than on the gateway and delaying the call doing so), bounce calls while not letting know the calle that the call has been bounced around, as well as making calls using a freely selectable caller id would be extremely useful features.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links