cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
265
Views
0
Helpful
0
Comments
cdnadmin
Community Member
This document was generated from CDN thread

Created by: Abdul Rasheed on 02-10-2009 04:47:01 PM
Hi,
       we are planning to get associated buisness data /call variables associated from calls in an IPCC environment and tag that call /buisness data along with the voice being recorded. The application is targeted to support old versions of IPCC (4.0 onwards till the latest version) . Please advise me if getting the details from CTIOS , or communicating directly with CTI server using socket , will be good to satsify these requirements. Normally for third party integrators who do voice recording, which is the approach being followed.
 
Thanks and Regards
Abdul Rasheed

Subject: RE: CTI integration
Replied by: Abdul Rasheed on 05-10-2009 01:15:41 PM
Hi ,
      it will be great if somebody can help me on this query.
 
Regards
Abdul

Subject: RE: New Message from Abdul Rasheed in Computer Telephony Integration Object
Replied by: David Lender on 05-10-2009 02:49:28 PM
are you referring to IPCC Express or Enterprise?  There is no IPCC
Enterprise 4.0.  There is no CTIOS for IPCC Express.

Subject: RE: New Message from Abdul Rasheed in Computer Telephony Integration Object
Replied by: Abdul Rasheed on 05-10-2009 03:17:28 PM
Hi David,
                 I am referring to IPCC Enterprise only. My concern here is that , when i do an integration with IPCC to get call related data and call variables,  should i develop an interface with CTI OS , or it should be done using CTI protocol using sockets.  our application is supposed to support all versions of IPCC enterprise. i hope my question is clear? please let me know if you need any more details. Appreciating your great support always.
 
Thanks and Regards
Abdul Rasheed

Subject: RE: New Message from Abdul Rasheed in Computer Telephony Integration Object
Replied by: Juan Ramon Acosta on 06-10-2009 07:55:29 AM
Abdul,
 
Let me answer your first question. The trade off between CTI OS vs CTI-Sockets is pretty big.
 
CTIOS CIL will give you failover, smart-button enablement and connection management. With CTI-Sockets you have to build all by your self.
 
I consider the best ROI and best time to market can be achieved with CTIOS by re-using the sample code. For instance, the CTIOS Toolkit Combo C# sample was written with a Model-Viewer- Controller Design  pattern, Such that you can take and re-use the entire  CTI functionality since it is decoupled from the GUI .
 
Also you can take  advantage of the CTIOS CIL Unified Programing Paradigm. Take that C# code and  migrate it  to any of the other supported programming platforms by CTIOS with very little effort. All you will  have to worry about is the business logic you want to build to your application.
 
In terms of development time using CTIOS will be significantly shorter compared if you use  CTI-Sockets

Hope this helps you.

Subject: RE: New Message from Abdul Rasheed in Computer Telephony Integration Object
Replied by: Abdul Rasheed on 06-10-2009 04:29:04 PM
Hi Juan,
             Thanks a lot for the details. I agree with you, that CTIOS development time can be reduced significantly and it can be developed with less number of errors.  my concern was , whether it has any version dependency on IPCC ?  . we are trying to develop a product, and it is supposed to support all kind of IPCC enterprise deployments.  Also i would like to know if it will consume any application licenses in the CTIOS server according to number of connections.  i am targeting to get the agent id, skill set, and other call variables associated with a call. For this purpose i think i need to open filter mode sessions . CTIOS allow only 2 filter mode sessions. So if some other applications in the call centre is already open the filter mode session , we cannot do a third one. These are my concerns.
 
Thanks and Regards
Abdul Rasheed

Subject: RE: New Message from Abdul Rasheed in Computer Telephony Integration Object
Replied by: Juan Ramon Acosta on 07-10-2009 02:38:42 PM
Abdul,
 
I am not sure how far back you have to go with the IPCC versions you need to support but right off the bat any version 4.x 5.x and 6.x of CTIOS/UCCE (IPCC) are already end-of-life and end-of-support. So you should not attempt doing anythign with those versions.
 
Now the best way to find out what CIL to chose that can be used with some recent and past versions is to refer back to the CTI Compatibility Matrix http://tinyurl.com/ydh5kpv in the Cisco page.  I would start there to find exactly what is the best choice and combination.
 
Your second concern, you will not be consuming any licenses if you use one ore more connection to CTIOS, you will only be reducing the max number of agents that can login to UCCE thru CTIOS.
 
However, since you are planing to use a filtermode app. You are correct, you will be limited to only 2 filter mode apps. This is a capacity restriction to insure CTIOS performs as expected and does not impact the over all PG host performance. CTIOS will not allow the third connection and you will receive an eCTIOSFailureEvernt
 
I am not sure what is the type of application you are going to build, but if you have already a filter mode app the best idea will be to decouple the CTIOS Filtermode session logic from the current app logic and have an event subscription pattern based architecture where the events received from the CIL can activate the apps logic thru a signaling or application specific event mechanism.

Subject: RE: New Message from Abdul Rasheed in Computer Telephony Integration Object
Replied by: Abdul Rasheed on 07-10-2009 05:29:21 PM
Dear Juan,
                   It was a great explanation for my queries. Thanks a lot for your great help.  Regarding the application which we are planning, we have a voice recording application , we are planning to get the agentid, call variables, skill, etc associated with each call being recorded . In the coming months we are expecting a deployment , customer  provided the call manager version as 3.3(5) but till now we dont have any idea  about IPCC/ICM versions, so i am bit worried if our integration will support such a deployment. Thats why i raised such a concern.  For testing the application i hope initial testign can be done using CTIOS simulator application and CTIOS server ? we dont have an ICM /IPCC in our lab.
 
Thanks and Regards
Abdul Rasheed

Subject: RE: New Message from Abdul Rasheed in Computer Telephony Integration Object
Replied by: David Lender on 07-10-2009 05:51:28 PM
There is an allagents sample app for the .NET Cil in the CTIOS toolkit
which is an example of a filter mode application.  Note that
ctiserversim is provided "as is" and is not a substitute for testing
with an ICM/IPCC lab.

Subject: RE: New Message from Abdul Rasheed in Computer Telephony Integration Object
Replied by: Abdul Rasheed on 07-10-2009 05:58:41 PM
Hi David,
                I am going through the samples now.  with the call object,  i could see all the information i need to attach with that specific call, but i couldnt find the agent id associated with the call, is it provided with call object?
 
Regards
Abdul

Subject: RE: New Message from Abdul Rasheed in Computer Telephony Integration Object
Replied by: David Lender on 07-10-2009 07:09:28 PM
In filter mode there is no mapping between the agent and call objects.
A call event does not include the agent id. 

In agent mode, the current call for the session maps to the agent that
was issued a setagent for the session.

Call recording apps usually make use of RTP Start and Stop events
These events include both the callid and the agentid.

Subject: RE: New Message from Abdul Rasheed in Computer Telephony Integration Object
Replied by: Abdul Rasheed on 08-10-2009 07:55:17 AM
Thanks a lot  David and Juan for the outstanding assistance provided . It is clear now.
 
 
Thanks and Regards
Abdul Rasheed

Subject: RE: New Message from Abdul Rasheed in Computer Telephony Integration Object
Replied by: Juan Ramon Acosta on 08-10-2009 07:11:55 PM
You are wellcome.
 
Good luck ith your implementation
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links