cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1252
Views
0
Helpful
0
Comments
cdnadmin
Community Member
This document was generated from CDN thread

Created by: Umair Abbasi on 25-07-2010 03:22:36 PM
Hi all,
 
I need to connect ctiserver simulator with my testing .net application. The CTI simulator is provided with SDK.Whenever i start the simulator , an OnConnectionFailure event is being fired.
I am providing server and port on which the simulator is listening, but all in vain.
 
Is there any way to connect with simulator so that i can test my CTI applicaiton??
 
Regards,
Abbasikov

Subject: RE: CTI Server Simulator
Replied by: John McCann on 29-07-2010 10:33:16 PM
Well, being that no one has replied I'll throw in the little I know about it. It has been almost 2 years since I used the simulator. However, I recall having connection issues initially. It turned out that the client application does not connect to the simulator directly. The client connects to the CTIOS Server which connects to the CTI Server. The simulator replaces the CTI Server. Therefore the connections are CLIENT -> CTIOS Server -> Simulator. You should be trying to connect the CTIOS Server and simulator. Hope this helps.
 
-John McCann

Subject: RE: CTI Server Simulator
Replied by: Umair Abbasi on 30-07-2010 10:44:58 AM
Well, being that no one has replied I'll throw in the little I know about it. It has been almost 2 years since I used the simulator. However, I recall having connection issues initially. It turned out that the client application does not connect to the simulator directly. The client connects to the CTIOS Server which connects to the CTI Server. The simulator replaces the CTI Server. Therefore the connections are CLIENT -> CTIOS Server -> Simulator. You should be trying to connect the CTIOS Server and simulator. Hope this helps.
 
-John McCann

 
Dear John,
 
Where i could find the CTIOS server ??
Did it is installed as a service when i installed the Cisco SDK ??
 
Thanks,
Abbasikov

Subject: RE: CTI Server Simulator
Replied by: John McCann on 30-07-2010 03:35:01 PM





Dear John,
 
Where i could find the CTIOS server ??
Did it is installed as a service when i installed the Cisco SDK ??
 
Thanks,
Abbasikov

 
I do not know where you could find the CTIOS Server install. Part of the my initial trouble was that the CTIOS Server install was not part of the CTIOS SDK; which rendered the simulator useless. We actually use a CISCO consultant to handle the backend; so, I do not have access to the install materials. However, I attended a CISCO training course that provided the install as part of the course material. I haven't looked at it in years since after the course we had our servers setup, so no need for the simulator. I wish I could be of more help, everything I'm stating is from memory over 2 years ago. Hopefully someone from Cisco monitors these forums. I just discovered this forum a couple days ago.
 
Regards,
John
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links