cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
177
Views
0
Helpful
0
Comments
cdnadmin
Community Member
This document was generated from CDN thread

Created by: JAMES DEPHILLIP II on 25-10-2010 02:31:57 PM
I have a script that plays a prompt to confirm the call but when the person confirms the ringback tone is delayed.  Here is a copy of my script if anyone can assist with why this would happen.
 
Thanks
 

proc act_Setup { } {
leg setupack leg_incoming
leg proceeding leg_incoming
leg connect leg_incoming
global params
global pattern
media play leg_incoming flash:en_media_record.au
set params(maxDigits) 1
set pattern(1) "1"
leg collectdigits leg_incoming params pattern
}  
 
proc act_Call { } {
set phoneip [infotag get leg_remote_media_ip_address leg_incoming]
set queryparam [::httpios::formatQuery "ip" $phoneip "uri" "http://10.30.1.111/class.xml"]
set confirm [infotag get evt_dcdigits]
if { $confirm == 1 } {
  set orig [infotag get leg_display_info]
  set callInfo(displayInfo) "(CUS-A) $orig"
  set dnis [infotag get leg_dnis]
  leg setup $dnis callInfo leg_incoming
  ::httpios::geturl "http://10.30.1.111/router.php" -query $queryparam -command getEndCallResponse
} else {
  call close
}
}
 
proc getEndCallResponse {token} {
 
global stParam
 
puts "callback Status=[::httpios::status $token],"
if {[string compare [::httpios::status $token] ok]} {
set resp [::httpios::data $token]
puts "Response:  $resp"
}
}
 
proc act_Cleanup { } {
call close
set phoneip [infotag get leg_remote_media_ip_address leg_incoming]
set queryparam [::httpios::formatQuery "ip" $phoneip "uri" "Init:AppStatus"]
::httpios::geturl "http://10.30.1.111/router.php" -query $queryparam -command getEndCallResponse
} 
 
#---------------------------------- 
#   State Machine 
#---------------------------------- 
 set TopFSM(any_state,ev_disconnected) "act_Cleanup same_state"
 set TopFSM(any_state,ev_handoff) "act_Cleanup same_state"
 set TopFSM(CALL_INIT,ev_setup_indication) "act_Setup PROMPT"
 set TopFSM(PROMPT,ev_collectdigits_done)  "act_Call CALLACTIVE" 
 set TopFSM(CALLDISCONNECT,ev_disconnected)"act_Cleanup same_state"
 set TopFSM(CALLDISCONNECT,ev_disconnect_done) "act_Cleanup same_state"
 
 fsm define TopFSM CALL_INIT

Subject: RE: Delayed Ringback
Replied by: Yaw-Ming Chen on 25-10-2010 02:57:07 PM
How long is the delay ?
 
Try just use "leg collectdigits leg_incoming params" to see if it helps ?
 
You can turn on "deb voip app tcl"watch the when when digit is pressed and when is received by Tcl.
 
You can also
set callInfo(notifyEvents) "ev_alert ev_progress ev_proceeding"
to observe when ringing is recieved from far end.
 
Thanks !

Subject: RE: Delayed Ringback
Replied by: JAMES DEPHILLIP II on 25-10-2010 03:31:20 PM
I gave that a try and it didn't change anything.  How do I use leg setup_continue?  Would that help I think I need it so that I can perform functions once the call is setup.

Subject: RE: Delayed Ringback
Replied by: Yaw-Ming Chen on 25-10-2010 03:57:23 PM
No, I don't think it will help. My suggestion is to find out what causes the delay ?
You set params(maxDigits) 1 so scrript should continue as soon as digit is pressed otherwise it will wait for digit time out.
If you press "#' after confirm digit is delay still there ?
 
Thanks !

Subject: RE: Delayed Ringback
Replied by: JAMES DEPHILLIP II on 25-10-2010 04:03:33 PM
No I need setup and continue so that I can learn the IP of the Media Endpoint before I continue the script. Right now I am launching the media play and digit collect and then performing my http commands.  I need to push the http commands first and the script gives a blank if I try to use [infotag get leg_remote_media_ip_address leg_incoming] before the media play and leg collect digits.  As for the delay the other phone is ringing instantly but the ringback is not.

Subject: RE: Delayed Ringback
Replied by: Yaw-Ming Chen on 25-10-2010 04:41:01 PM
For leg stuup_continue we need to know command_handle of leg setup
We can get it by doing the following
 
 leg setup $dest callInfo
    set commandSetup [infotag get last_command_handle]
 
Thanks !

Subject: RE: Delayed Ringback
Replied by: Yaw-Ming Chen on 25-10-2010 05:48:32 PM
I think if you use "infotag get leg_remote_signaling_ip_addres" you might get CM's IP but I doubt if you can get end point IP.
If it is SIP trunk we might be able to parse header. Of cause only header contains end point's IP.
 
Thanks !
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links