Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Created by: Matthias Diehl on 07-05-2009 12:29:46 PM Hello I have a issue to add Translation Pattern to our Callmanager 6.1.1 with AXL SOAP Interface. When i use the command addTransPattern i receive always a exception: ----- PatternUrgency is always TRUE for Translation Pattern ----- I change this PatternUrgency to true, false and leave out this Parameter. But i always get this exception. Can anyone help me? Regards Matthias
Subject: RE: Error - addTransPattern - PatternUrgency is always TRUE Replied by: julien CHODLEWSKI on 07-05-2009 01:07:37 PM I had this issue too .
I put the element "patternUrgency" between" "pattern" and "description", I set it to "true" and it was ok.
Try that ! Julien
Subject: RE: Error - addTransPattern - PatternUrgency is always TRUE Replied by: Matthias Diehl on 07-05-2009 01:21:59 PM Hello I added patternUrgency beetween pattern and description, but unfortunately this has not helped. <addTransPattern> 123 true <description>test</description> <usage>Translation</usage> <routePartitionName>test</routePartitionName> <blockEnable>false</blockEnable> <calledPartyTransformationMask></calledPartyTransformationMask> <callingPartyTransformationMask></callingPartyTransformationMask> <callingPartyPrefixDigits>00</callingPartyPrefixDigits> <useCallingPartyPhoneMask>Off</useCallingPartyPhoneMask> <dialPlanWizardGenId></dialPlanWizardGenId> <digitDiscardInstructionName>PreDot</digitDiscardInstructionName> <messageWaiting>Lamp Off</messageWaiting> <networkLocation>OnNet</networkLocation> <callingSearchSpaceName>internal</callingSearchSpaceName> </addTransPattern> Matthias
Subject: RE: Error - addTransPattern - PatternUrgency is always TRUE Replied by: julien CHODLEWSKI on 07-05-2009 01:52:26 PM ok, but "prefixDigitsOut" is missing. This element have to be at the end after callingSearchSpaceName. It can be null, but it has to be here. The exception is always the same ? "PatternUrgency is always TRUE for Translation Pattern"
Subject: RE: Error - addTransPattern - PatternUrgency is always TRUE Replied by: Matthias Diehl on 07-05-2009 02:03:59 PM strange i think this forum not shows all. i have added "prefixdigitOut" but the error is the same ----- (System.Web.Services.Protocols.SoapException: PatternUrgency is always TRUE for Translation Pattern ------ i attached a file with my addTransPattern request
Subject: RE: Error - addTransPattern - PatternUrgency is always TRUE Replied by: Matthias Diehl on 08-05-2009 02:09:05 PM Hello Julien Can you post your configuration from addTransPattern. Perhaps i found any differences. Thanks Matthias
Subject: RE: Error - addTransPattern - PatternUrgency is always TRUE Replied by: julien CHODLEWSKI on 08-05-2009 03:19:48 PM In fact I use php with soap extension, so I don't use hard-coded request. I give an array to a function "__soapCall" and this one build the request. Here is the code :
$result=$client->__soapCall("addTransPattern",array('AddTransPatternReq'=>$newPattern)); and this code work well. I don't understand why your request not work, yet i put the same attribute, I think.
Subject: RE: Error - addTransPattern - PatternUrgency is always TRUE Replied by: Matthias Diehl on 11-05-2009 11:06:17 AM Which Callmanager Version do you use?
Subject: RE: Error - addTransPattern - PatternUrgency is always TRUE Replied by: julien CHODLEWSKI on 11-05-2009 01:46:17 PM Hi Matthias, I'm using the 6.0(1) and 6.1(2)
Subject: RE: Error - addTransPattern - PatternUrgency is always TRUE Replied by: ALFREDO PRADO on 14-11-2009 04:55:59 PM Hi, I had this issue too . I use the same code that Julien: $newPattern=array('newPattern'=>array('pattern'=>'1234', 'patternUrgency'=> 'true', 'description' => 'test2', 'usage'=>'Translation', 'routePartitionName'=>'P_BAT_TEST1', 'blockEnable'=>'false', 'calledPartyTransformationMask'=> '0101010101', 'callingPartyTransformationMask'=>'', 'useCallingPartyPhoneMask' => 'Default', 'dialPlanWizardGenId'=>'', 'digitDiscardInstructionName'=>'PreDot', 'messageWaiting'=>'Lamp Off', 'networkLocation'=> 'OnNet', 'callingSearchSpaceName'=>'', 'prefixDigitsOut'=> ''));
$result=$client->addTransPattern($newPattern); but when see the logs in AXL Web service the SOAP request show the follow: <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://www.cisco.com/AXL/API/6.1"> <SOAP-ENV:Body><ns1:addTransPattern> <newPattern><pattern>1234</pattern> <description>test2</description> <usage>Translation</usage> <routePartitionName>P_BAT_TEST1</routePartitionName> <blockEnable>true</blockEnable> <calledPartyTransformationMask>0101010101</calledPartyTransformationMask> <callingPartyTransformationMask></callingPartyTransformationMask> <useCallingPartyPhoneMask>Default</useCallingPartyPhoneMask> <callingSearchSpaceName></callingSearchSpaceName> </newPattern> </ns1:addTransPattern></SOAP-ENV:Body> </SOAP-ENV:Envelope> For any strange reason, the PHP SOAP function not send "patternUrgency" field. I'm use Call Manager version 6.1.2.1000-13
Subject: RE: Error - addTransPattern - PatternUrgency is always TRUE Replied by: ALFREDO PRADO on 15-11-2009 02:00:24 PM Hi: I'm investigate the problem and I see that PHP have problem with load AXLAPI.wsdl file, when I change the order some field in this file for example locationName in addPhone that is not recognize or send in SOAP request, when I change the order in definition, the request work. With this work in solution and found that problem is the version PHP, because I try the same code in follow PHP version: Linux debian 2.6.26-1-686 #1 SMP Fri Mar 13 18:08:45 UTC 2009 i686 GNU/Linux php -v PHP 5.2.6-1+lenny3 with Suhosin-Patch 0.9.6.2 (cli) (built: Apr 26 2009 22:16:23) Copyright (c) 1997-2008 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies The version of above all params from the array are send with SOAP function request. All work fine. Linux odisea.n 2.6.16.38.xs3.2.0.531.3960 #2 SMP Sat Mar 24 22:03:09 UTC 2007 i686 GNU/Linux php -v PHP 5.2.0-8+etch13 (cli) (built: Oct 2 2008 08:26:18) Copyright (c) 1997-2006 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2006 Zend Technologies The version of above not all params from the array are send with SOAP function request. For example: in addPhone ...... locationName, User Hold MOH Audio Source,Network Hold MOH Audio Source,etc not send with SOAP request. I hope help you with yours problem. Best Regards, Alfredo Prado
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: