cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
671
Views
0
Helpful
0
Comments
cdnadmin
Community Member
This document was generated from CDN thread

Created by: Kevin Pickard on 30-09-2011 10:49:20 AM
I had posted the following at the Cisco support forums and was not getting any response. I just found out that there is a completely different forum (this one) for Finesse.
===========================================================
I have installed some of our UCC 85.(1) NFR Kit components in our lab. I have CM working with a couple of lab phones. After some help here I now think I have UCCE working somewhat. I appear to have a working PG/PIM connection with my CM. And my ctisvr process appears as ACTIVE (thanks David). I am now trying to get the Finesse Server installed. As a result I have a few questions.
 
The Installation document has the following in Chapter 3 (Upgrade):
 
"Download the 8.5(3) Release from Cisco.com and place the file on an FTP or SFTP serveror burn the ISO file to DVD."
 
Now earlier I did find this on the Cisco site with names like "UCSInstall_CCD_8.5.3.98000-400.sgn.part1.rar". In total there were 6 parts and when put together and extracted from the RAR I had an ISO image. Unfortunately, unlike what the name would have suggested, the version on the ISO is "8.5.0.98000-400" which is *earlier* than the version that came with out NFR Kit (8.5.1.10000-14".
 
So question #1 is where can I find the proper 8.5(3) upgrade if it exists?
 
The next issue is a task in Chapter 4 (After the installation). I successfully disabled the Cisco Security Agent. I also configured the system settings using the URL "http://<HOST NAME or IP ADDRESS>/cfadmin" (so Tomcat is operational). The next step though is labelled "Configure the Realm" where it states the following:
 
Perform the following step to manually install the Unified CCE realm.
1.Update the $CCBU_CC_HOME/conf /CCERealm.properties file to match the targetUnified CCE deployment.
   Note: $CCBU_CC_HOME = /opt/cisco/desktop
 
Unfortunately it does not give any instructions on how exactly to do this. And with the file system locked down I am unable to even look for the file specified.
 
So question #2 is how do I do the step "Configure the Realm"?
 
Despite the above I tried to proceed anyway. To restart the services I had to reboot the server as the documented way to restart the Tomcat service was "TBD". I setup an Agent on my UCCE system with a password. I then tried to go the URL "http://<host name>/desktop". I got a 404 response showing that "The requested resource (/desktop/) is not available". Now I did manage to download the Tomcat logs via the CLI and the manager log shows the following.
 
INFO: Manager: init: Global resources are available
Sep 29, 2011 3:18:35 PM org.apache.catalina.core.ApplicationContext log (this line repeated every other so removed)
INFO: Manager: start: Starting web application at '/ccmservice'
INFO: Manager: start: Starting web application at '/ast'
INFO: Manager: start: Starting web application at '/reporter-servlet'
INFO: Manager: start: Starting web application at '/tracecollection'
INFO: Manager: start: Starting web application at '/tomcatstats'
INFO: Manager: start: Starting web application at '/cfdesktop'
INFO: Manager: start: Starting web application at '/webservices'
INFO: Manager: start: Starting web application at '/cfservice'
 
So it looks like the desktop application is loaded okay. I even tried going to "http://<host name>/cfdesktop" but it gave the same error. I was able to go to "http://<host name>/cfservice" and logged into the Servicability application. I saw the Desktop service as In Service. So it looks okay from there.
 
So my final question #3 is why am I unable to get the /desktop URL to work? Is it due to the Realm thing above?
 
Actually I have one more question (which I had posted as a followup to my original forum posting).
 
As a follow up to this, when the Finesse server comes up I do see a connection successfully created on the UCCE side in the ctisvr process window. So I know the 2 servers are talking. One other question I have related to this is that the Finesse documentation states that Finesse is compatible with the CUCM PG. But from what I am seeing it is communicating with UCCE via the ctisvr link. Does it also need to establish a JTAPI connection somehow via a CUCM PG? And along with this when you configure Finesse via the /cfadmin screen you have to put in the IP and port for the UCCE server with 42027 being the default for the port (indicating ctisvr). But it also asks for a Peripheral ID along with these other 2 values. What Peripheral ID is this? Thanks for any help provided.
 
Thanks for any help provided.
 
Kevin Pickard

Subject: RE: Finesse Install Issues
Replied by: David Lender on 30-09-2011 03:25:13 PM
You appear to have the correct version of Finesse 8.5(3).  We tried renaming the files to "UCSInstall_CCD_8.5.3.98000-400.sgn.part1.rar" etc. to show that it was for v8.5(3) but the file that gets created is indeed
"8.5.0.98000-400"  when you unpack the 6 files.

Yes, Finesse connects to CTI Server.  It does not require a separate connection to Callmanager.  Yes there should be a JTAPI connection to Callmanager.  The peripheral ID that finesse needs is the peripheral ID of the PG that CTI Server is running on.  This should be in your ICM Configuration.

Subject: RE: Finesse Install Issues
Replied by: David Lender on 30-09-2011 03:34:45 PM
Also, this thread on modifying the Realm properties may be useful

http://developer.cisco.com/web/finesse/forums/-/message_boards/view_message/4255302?_19_
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links