This document was generated from CDN thread
Created by: batteryinyourleg (simulated) on 23-11-2011 06:08:15 AM
How do I get started using the toolkit? The manual says that all you need to develop a Screen Pop application are 5 minutes, but I've been spending hours just to get the servers running (without any success)!
Additionally, in between, the simulator crashes and the CTI OS Server keeps closing its own window and restarting again, always displaying this message:
CtiOsEMSHelper::isColocated(): SOFTWARE\Cisco Systems, Inc.\ICM\SystemSettings\MBufMemLimit not found. CTI OS is not co-located with the PG.
11:16:46 Trace: Display of EMS messages to the screen has been dynamically disabled.
Can someone help? I just need to do a simple Screen Pop app, need to set the simplest dev environment in my machine, going crazy because I can't find any documentation on such a simple subject (set a simple dev environment).
Subject: RE: New Message from batteryinyourleg (simulated) in Computer Telephony Int
Replied by: David Lender on 23-11-2011 03:17:00 PM
The simulator CTIServerSim is provided as is, and setting up an UCCE lab is a rather large undertaking outside the scope of this forum. It does sound like your CTIOS Server configuration has issues. You can enable EMS messages to the screen using the HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Cisco Systems, Inc.\ICM\<instancename>\<CTIOS name>\EMS\CurrentVersion\Library\Processes\ctios\EMSDisplayToScreen key setting it to 1.
One hint on using the simulator, it requires you to set the protocol version to 13 in the CTIOS Server configuration registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Cisco Systems, Inc.\Ctios\<ctios instance name> \CTIOS1\CtiDriver\Config \ProtocolVersion = 13.
Again the simulator is not supported by Cisco.
As an alternative to the EMSDisplaytoScreen key, you might also get familiar with the dumplog utility to look at ICM/CTIOS Server logs.
Setting up a UCCE lab is not a 5 minute undertaking. Once you have the out of box CTIOS Agent Desktop running correctly in your UCCE lab environment (you can get TAC support for this if you have purchased support for your lab system), you can certainly drag and drop the activex controls onto a form and get a working softphone in 5 minutes.
l.