cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
320
Views
0
Helpful
0
Comments
cdnadmin
Community Member
This document was generated from CDN thread

Created by: null on 21-05-2007 01:12:55 PM
I'm trying to install Call Services 3.5 on a linux server with no graphical environment. According to the KB article http://kb.audiumcentral.com/questions/120/Can-Audium-Call-Services-be-installed-via-the-console%3F--%28Linux%7B47%7DSolaris-only%29
all I should need to do is.. [code:1:e635b231e6]./audium.bin -i console[/code:1:e635b231e6]
However, it fails in this manner...
[code:1:e635b231e6]Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
./audium.bin: 2135: strings: not found

Launching installer...

Preparing CONSOLE Mode Installation...

===============================================================================
(created with InstallAnywhere by Zero G)

-----

=======================================================

Installer User Interface Mode Not Supported

Unable to load and to prepare the installer in console or silent mode.

=======================================================[/code:1:e635b231e6]

Can anybody offer any advice? Thanks.

Subject: RE: Headless Install
Replied by: null on 22-05-2007 08:33:54 PM
Hi Alan,

We tested the installer for Call Services 3.5 on our Linux environment and it worked fine. The issue you are having could be related to an incompatible version of the Java Virtual Machine.

To check which Java version is used by your OS, type "java -version" in the command prompt.

Note that per our Installation Guide , the supported Java versions are 1.3 and 1.4. You can download them at:

Java 1.3.1 J2SE
http://java.sun.com/products/archive/j2se/1.3.1_06/index.html
or
Java 1.4.2 J2SE
http://java.sun.com/products/archive/j2se/1.4.2_06/index.html

If you have the correct version of Java installed, you may be able to override the Java runtime that the installer is attempting to use by specifying the "LAX_VM" option, as follows:

audium.bin LAX_VM <path> -i console

For example:

audium.bin LAX_VM "usr/java/j2re1.4.2_06/bin/java" -i console

If you continue to experience the error after taking these steps, please feel free to contact us again.

Hope this helps,
Harish

Subject: RE: Headless Install
Replied by: null on 23-05-2007 07:50:08 AM
I'm sorry, it's actually 3.6 I am having problems with.

I did try what you suggest, but I still have the same problem. It looks to me from the output that it has it's own bundled JRE that it uses for installation.

Subject: RE: Headless Install
Replied by: null on 24-05-2007 07:03:20 PM
Hi Alan,

We tested the Call Services 3.6 installer and could not replicate the issue in our environment.

Here are a few things you could try:
[list:f0b6bee86e]
1. Verify that the installer you have is not corrupted. Run the command md5sum on the audium.bin file and verify that the checksum is correct. The installer for Call Services 3.6.10 and the checksum can be found on this page: http://www.audiumcentral.com/supportcenter/viewtopic.php?t=2842

2. Check the version of Java installed on your Linux machine. Run "java -version" on the command prompt. We have seen some issues with the installer if Java 5 is installed on the machine.

3. If the above steps do not work, another option could be to download and run the installer on another operating system, like Windows or another Linux machine. Since the installer does not do anything that is specific to the operating system, this would work too.

Download and run the windows installer for Call Services 3.6.10 on a Windows machine. After the installation, go to the installation folder and zip/tar the AudiumHome folder and Audium.war. Copy the archive to the appropriate directory on the Linux machine and unzip/untar it. The extra steps the installer does automatically for you is setting up AUDIUM_HOME and copying Audium.war to the appropriate folder in your application server. For a manual installation, you will need to set AUDIUM_HOME manually to the appropriate location and also copy Audium.war to the application server.
[/list:u:f0b6bee86e]
Hope this helps,
Harish

Subject: RE: Headless Install
Replied by: null on 25-05-2007 03:11:46 PM
Thanks for you advice.

MD5 was correct
I do have Java 5 - seems strange it could cause issues as it seems to use it's own bundled JVM.

I will try installing it elswhere and moving it as you suggest.

Thanks again.

Subject: RE: Headless Install
Replied by: null on 01-06-2007 09:12:36 AM
I tried installing it on another machine (with a graphical environment) and moving it. This mostly worked however I cannot log into the Licensing webapp. The credential I am using are definately correct - I can see what I entered during installation by looking at the UninstallerData/installvariables.properties file.

Any ideas would be much appreciated.

Subject: RE: Headless Install
Replied by: null on 01-06-2007 09:53:20 AM
After further investigation, it seems the username and password were reset to admin and password. Got it working.

Subject: RE: Headless Install
Replied by: Michael Bochynski on 01-06-2007 01:56:40 PM
Alan,

Username and password are stored in AUDIUM_HOME\conf\login.properties file. The default values are admin/password, however you can change them to you liking.

Regards,
Michael
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links